CO2 Distributor 2 Way w/ 5/16" barb shutoff

$34.99

SKU# K242

Flat Rate Shipping only $7.99 only from Northern Brewer
Add more kegs to your kegerator or keezer with a CO2 Distributor. Or have an extra gas line available for your draft bottle filler.

This CO2 manifold comes with two 5/16" barbed shutoff valves and a barbed CO2 inlet for more permanent installations where the lines do not need to be removed. 5/16" barbs work with the larger 5/16" ID gas line tubing. Corrosion-resistant nickel-plated brass manifold has shut-off valves with an integral check valve to prevent backflow of gas or liquid.

Be sure to add some Worm Gear or Oetiker clamps to hold things in place.

For a less permanent installation, check out our distributors that have 1/4" MFL threaded connections that work with a barbed swivel nut. 

Looking for a complete system? See our Draft Brewer keg systems.
Total:
$34.99

Availability: In stock

Pic of K242

More Views

  • Pic of K242
Product Details
Add more kegs to your kegerator or keezer with a CO2 Distributor. Or have an extra gas line available for your draft bottle filler.

This CO2 manifold comes with two 5/16" barbed shutoff valves and a barbed CO2 inlet for more permanent installations where the lines do not need to be removed. 5/16" barbs work with the larger 5/16" ID gas line tubing. Corrosion-resistant nickel-plated brass manifold has shut-off valves with an integral check valve to prevent backflow of gas or liquid.

Be sure to add some Worm Gear or Oetiker clamps to hold things in place.

For a less permanent installation, check out our distributors that have 1/4" MFL threaded connections that work with a barbed swivel nut. 

Looking for a complete system? See our Draft Brewer keg systems.
Additional Information
Support Documents:No
SizeNo
Reviews
5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
it works
does what its supposed to do.
March 28, 2016
Well-built
Solid construction, valves operate smoothly, no leaks.
November 11, 2013
Great product
Hooked up. No leaks, does exactly what it is advertised to do. No complaints.
March 22, 2016
Q&A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Do these need to be clean or soaking in a sanitizer or Oxi-clean/PBW before first use to remove any contaminants or oils they might have picked up during assembly?
T S on Dec 8, 2015
BEST ANSWER: It is not necessary to soak in cleanser but it wouldn't hurt anything if you did.

Please wait...

Your selected product has been added to your Cart.

Continue shopping
View cart & checkout