Skip to product information
A Carboy Brush

Carboy Brush

SKU 7040
$11.99

Pricing details

Understanding the Prices on Our Product Pages

When shopping on our site, you might notice different types of prices listed for products. Here's a quick guide to help you understand what each price means:

  • Regular Price: The Regular Price represents the price before any discounts. This price typically reflects the median price from the past 90 to 180 days, depending on product category, excluding special promotions like holiday sales, limited-time deals, multi-unit deals, and clearance events.
  • Sale Price: This is the updated price of an item after a reduction from the regular price. Sale prices are shorter in duration and offer the opportunity to save on products you love.
  • MSRP: Also known as the Manufacturer's Suggested Retail Price (MSRP), this price is provided by the manufacturer. It serves as a benchmark to highlight the value of our current pricing.

Please note that product prices are subject to change without notice.

Eligible for Free Standard Shipping DetailsOpens in a new window.
%3Cp%3EEarn%20up%20to%20[points_amount]%20when%20completing%20this%20purchase%3C/p%3E

Product Details

Indispensable for cleaning all kinds of carboys. 24" long and bent at a 90-degree angle to reach all corners of a carboy interior.

Do not use on plastic buckets or Better Bottle fermenters. For use with glass or stainless equipment only!

California Proposition 65

⚠ Proposition 65 Warning: This product can expose you to chemicals that are known to the State of California to cause cancer and birth defects or other reproductive harm.

Additional Information

SKU
7040
  • 5 stars: 31 (61%)
  • 4 stars: 12 (24%)
  • 3 stars: 3 (6%)
  • 2 stars: 1 (2%)
  • 1 star: 4 (8%)
J
Joseph C.
Use Caution

I just got one of these and I noticed that at the end of the brush there was not enough bristles to cover the metal end. While cleaning a fairly new 6 gallon glass carboy, the metal part contacted the glass and punched out a half-dollar sized hole, destroying the carboy

T
Thomas M.

Carboy Brush

D
Donald S.
Required tool.

It's a brush you need to clean up the mess, and, it does the job! Buy it.

K
K.C.

Good quality. I bought it for my 1 gallon carboy and its a little bigger than I expected (that may be my fault for not seeing if there were measurements in the description).

T
Thomas C.

Carboy Brush

D
Donald H.

Very pleased order filled on timely manner and shipped well nothing broken

C
Chelsea L.
Works as expected

Not much to say, works as expected. Cleans perfectly and makes my life easier until I can buy a full cleaning system.

H
H.Morey
Carboy brush

Works great. Fits in my 3 gallon carboy no problem.

C
Customer
Gets it done

I was skeptical but this thing is shaped literally perfectly to get exactly to the part of the bottle that’s unreachable otherwise. Nice

T
TS
Carboy Brush

It brushes well. 🧼

D
Dillon M.
Brush works great

Only problem is the tip of brush starts wearing badly after 4-5 uses. Other than that awesome brush

A
A
Works

Worked as intended

M
Matthew H.
Gotta keep 'em clean

Good for cleaning that stuck-on residue after an active fermentation

J
Jacob K.
Carboy Brush

This is a must have if you have a Carboy. Also clean up is a breeze if you let the Carboy sit over night with oxiclean and warm water. Next day I finished cleaning it with minimal effort. The brush is perfect for cleaning the sides I noticed I had to pull out part of the brush to get the top rim but it is perfectly designed for the Carboy. Awesome product!

M
ML
It brushes effectively

It brushes effectively.

V
Varun S.
Reaches where your hand can't

Works well in cleaning with oxiclean. Helped retrieve a hydrometer accidentally dropped in there too!

W
William G.J.I.
Long enough for 6.5 gal Carboy

Good quality, easy to use when cleaning your carboys or even your brew buckets.

G
Gregory L.
Carboy brush

So glad to have this type of brush. Without it, cleaning sediment build up on the upper inside of a P.E.T carboy would be next to impossible. Great tool.

R
Rob

Great design. Holds shape well when bent.

J
Jim
Good

I still have not used it yet

R
Robert F.
Must Have!

This brush is the answer to cleaning out that carboy. I also use for my corny kegs.

M
Mark G.M.

Works perfectly

J
Justin

Very helpful cleaning the carboy. It doesn't do a very good job getting to the sides of the carboy but does well on the top and bottom.

C
Caleb J.
A Must Have for Cleaning Carboys

While a bit unwieldly for 1 gallon carboys (they have a brush on NB specifically for 1 gallon carboys) it's a must-have for anyone with 5+ gallon carboys.

L
Latin B.
It falls apart

I've purchased five of these and they all work once or twice and fall apart shortly thereafter. I had to get a custom pressure washer tip designed and made so I wouldn't bother with these brushes ever again.

This is a much higher failure rate than we commonly see. We would love to hear more about how they are being used and we are always more than happy to replace them.

J
Joseph C.
carboy brush

Works well.

F
Frank L.
Reshaping the brush makes it more functional.

Changed the cleaning length and angle to increase the function. Twirling will clean the entire shoulder of a carboy. The brush still flattens out to clean the domed bottom. Pay attention to the shape of the bristles at the tip to avoid the wire contacting the carboy.

The tip of the brush gets the heaviest use but has the least bristles.

C
Cameron C.
Essential tool for cleaning a carboy!

Brush does a great job of reaching every spot in the carboy. If there were a few more bristles on the end I'd rate it with five stars, but with a little extra time you can get some of the tougher scale off the sides. Cleaning carboy every time with this so there will be less scale to "scrub"

E
Erik V.
Scrub a dub dub

I use this on my 1 gallon fermenter jugs! Kind of big- made for large carboys- but still is able to fit and clear the gunk out of small fermenters too!

J
Jeff R.
Carboy brush

The brushes worked great on my drill. When I ordered my brush there was a mixup on the order and Brewmasters gratefully fixed the problem without any hesitation. Thanks again.

H
Heidi D.
More flexible would be better

The bristles are sturdy, and the angle that it's bent at gets the top of the Carboy cleaned well, but it's not so easy cleaning the inside bottom with it. Would be better if the handle was a bit flexible.

K
Kathy D.
Handy Tool

Needed a brush to clean the carboys. Works just fine. Nice tool.

J
James B.
It's a brush

As usual NB shipped quality equipment. Used it the day I got it and it does what it's designed to do.