Home | View Cart | Account | Catalog Request | About Us
Catalog Index
Other Categories
Counterpressure bottling allows you to transfer chilled, carbonated beer from a keg to a bottle with minimal foaming and CO2 loss. This is only possible by bottling in a pressurized atmosphere. Also required is the tubing kit (not pictured), which easily attaches to any keg system with 1/4-inch MFL threaded outlets and disconnects. Includes complete instructions.
Metal and plastic counterpressure filler from Listermann. Uses the same principles and basic design as our other counterpressure bottle filler (#7206), but simpler to operate—liquid flow, gas flow, and purging are all controlled by one valve. Complete with all necessary tubing and connectors—you supply disconnects for the keg.
From brewing engineer John Blichmann comes a revolutionary new bottle filler. The BeerGun is designed to be much more ergonomic and much less complex than a traditional counter pressure bottle filler. The BeerGun is designed to purge a beer bottle with CO2 gas, and then transfer carbonated beer into the bottle with minimal foaming, preserving a high level of the beer's carbonation. It is extremely simple to clean and set up. Unlike counter pressure fillers with multiple valves, the BeerGun has a one-handed intuitive operation—just press the trigger! Everything that touches the beer is stainless steel, which ensures the BeerGun is easy to keep clean, and that it will have a long life. The BeerGun includes a 10 foot length of 3/16" ID hose and a brush for cleaning the inside of the tubes.
Beer Gun Accessory Kit. This optional acceessory kit includes a liquid ball-lock disconnect, a 5 foot length of hose for your CO2 line with 1/4" stainless flare connectors on each end, one stainless 1/4" swivel nut (for the 10 foot beer hose that comes with the Beer Gun), and a brass 1/4" NPT X 1/4" flare adapter for connecting to the CO2 valve on the BeerGun.
Needed but not included is a T or Y adapter to split the gas line between the keg and the Beer Gun — we recommend a wye adapter (#K035) and a 1/4" MFL shutoff valve (#K038) added to your regulator.
Beer Gun Valve Seat. Replaces the little black rubber valve seat that sometimes gets lost.
With the Carbonator, you can transport draft beer anywhere. Simply transfer your chilled draft beer in a plastic soft drink bottle, screw on the Carbonator, squeeze out the extra air, and inject carbon dioxide into the bottle to keep the beer fresh and carbonated. The Carbonator also force carbonates just about anything. Requires ball lock fittings.
Use with soda kegs and a CO2 tank to filter your homebrew — use two jumper hoses to assemble the housing and a filter cartridge inline between two kegs and push beer through the filter under CO2 pressure. Use a coarse filter cartridge to for a rough polish or a 1-micron filter cartridge for a brilliant polish. Sanitize all components before use, and clean and dry thoroughly afterwards.
The filter housing is reinforced, clear polypropylene and has 3/8" female pipe thread openings. The jumper hose has a 3/8" MPT-to-barb fitting on one end and a 1/4" barbed swivel nut on the other to connnect to an MFL soda keg disconnect (disconnect not included!).
Copyright © 2008 Northern Brewer, Ltd. All rights reserved.
