More Search Options
 
Draft Beer Equipment

Draft Boxes

Draft boxes are used to chill draft beer in-line, without the need for a refrigerator. They are constructed out of a large 48 quart cooler. Inside the cooler is a cold plate, through which the beer travels. Setup is simple—just fill the cooler with ice and dispense your beer using the draft box.

Draft boxes are ideal when you need to dispense beer at a location without a refrigerator. They can be used with homebrew kegs or commercial kegs—just attach the approriate keg coupler or disconnect to the liquid input line.

*Cold Plate Draft Boxes

Our draft boxes are available with a double-faucet design. They include the cooler, faucets, two-circuit cold plate, and fittings. You will need to supply a tap hadle, CO2 cylinder, regulator, and a coupler that fits your beer keg.

The included cold plate body measures 10" x 15". It is made of several pounds of aluminum, which has excellent thermal properties. The large mass of aluminum acts as a heat sink, and rapidly transfers heat out the beer and into the surrounding ice water bath. Embedded inside this aluminum body is 18 feet of stainless steel 1/4" I.D. tubing, so everything the beer touches is smooth and easily cleanable. The surrounding cooler is a 48 quart, high impact chest with dense foam insulation. It is red in color. Dimensions: 13" high, 24" long, 15" wide.

#K225Draft Box, 2 faucets $253.99
EACH
BUY

*Draft Box Parts

Cold Plates. Our cold plates are available with a single or a double circuit. They feature 18' of 5/16" O.D. x 1/4" I.D. stainless steel tubing, which is embedded in a massive aluminum body for maximum cooling efficiency. They have been specifically designed for the correct resistance in a beer system. (18' of 1/4" stainless steel tubing equals 21.6 lbs. of resistance.) The stainless interior won't corrode and is easy to keep sanitary, while the outside has a smooth, easy-to-clean finish. Fittings are not included and must be ordered separately.

#K227Cold plate, 1 circuit $99.99
EACH
BUY
#K226Cold plate, 2 circuit $102.99
EACH
BUY

Cold Plate Fittings. These stainless steel fittings are threaded for our cold plates on one end, and have hose barbs on the other end. The in fitting (K229) has a 5/16" barb. The out fitting (K228) has a 1/4" barb. You will also need an o-ring for each fitting.

#K228Cold Plate Fitting, Out $2.99
EACH
BUY
#K229Cold Plate Fitting, In $2.99
EACH
BUY
#K250Cold Plate Flare Washer $0.10
EACH
BUY

Cold Plate Accessories. Pass-Through shanks are shanks that fit through the wall of a cooler. We have two sizes, depending on the thickness of your cooler wall. These shanks have a 3/8" bore, and have standard beer thread, which is compatible with our K018 Hex Nut or K087 Wing Nut. You will also need a coupling washer for each shank.

#K2313" Pass-Through Shank $17.99
EACH
BUY
#K2324" Pass-Through Shank $20.50
EACH
BUY
#K233Coupling Washer $1.35
EACH
BUY