Big Mouth Bubbler® Extra Lid Gaskets - 5 Count

$0.99

SKU# 41232

Flat Rate Shipping only $7.99 only from Northern Brewer
When you've loved your glass Big Mouth Bubbler® so much that the lid seal is starting to show wear, stocking up on extra lid gaskets and keeping them fresh ensures your Big Mouth Bubbler® will continue to produce nothing but the most delicious of homebrews. Use with the 5-Gallon, 6.5-Gallon and Little Big Mouth Bubbler®

Note: These gaskets are designed for the original screw-on lid for the Glass Big Mouth Bubbler® only. They will not fit the plastic models and are not designed for use with the new Universal Lid.
Total:
$0.99

Availability: In stock

Big Mouth Bubbler™ Extra Lid Gaskets - 5 Count

More Views

  • Big Mouth Bubbler™ Extra Lid Gaskets - 5 Count
Product Details
Designed to minimize air exchange between the external and internal environment on the Big Mouth Bubbler. Constructed of durable polyethylene foam, these semi-rigid seals are resistant to bacteria, mold, chemicals and solvents. Includes five lid gaskets.

Note: These gaskets are designed for the original screw-on lid for the Glass Big Mouth Bubbler® only. They will not fit the plastic models and are not designed for use with the new Universal Lid.
Reviews
2.6 / 5.0
7 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
4
Easy to clean. SO far
Easy to clean. SO far it's very nice.
November 11, 2015
seals the deal
Bought these to seal an antigue gallon jug I use for Fermenting peppers, factory jar used wax paper, these fit exactly.Also when I ordered the sales rep. Was kind enough to tell me foam plates cut out will get you by, saved about week or two of fresh peppers.
November 18, 2015
Designed for the Glass Bubbler
I only have the glass bubbler, and these indeed work perfect for that. I use 2 or 3 at a time to get a good seal, but they cheap and easy to put in or take out so no problem. They should probably make them thicker in the future.Make sure you are not buying these for a plastic bubbler!
February 19, 2015
Doesn't fit plastic Bigmouth
I bought this at the same time as a Bigmouth Bubbler, thinking it would seal between the lid and carboy, but it is nowhere close to fitting, about 3/4 inch too large in diameter. Possibly it might fit a glass bigmouth, but there is no indication in the description that this is what it is intended for. Or possibly someone with a very steady hand could trim it down to fit, but as delivered, it is worthless for the intended purpose.
December 30, 2014
These are for glass only
Per NB staff: The lid gaskets are designed for the glass Big Mouth Bubblers. The lid for the plastic BMB was designed so it wouldn't need gaskets. When the blue lid ring is screwed on it will pull the white lid down creating the seal.
January 16, 2015
THESE DO NOT FIT THE NEW STYLE GLASS BIG MOUTH UNIVERSAL LIDS EITHER
I just purchased a brand new 6.5 gallon glass big mouth bubbler and figured id buy these to go along with it. The description states these are for the glass only units so I figured I was good to go. my order came in and the new glass bubbler came with the Big Mouth Bubbler® Universal Lid - Single Port SKU# 41829 which physically cant be used with these seals. IM assuming that at some point the glass big mouth came with a different screw on lid that these work on. so WARNING if your ordering a new unit contact support to make sure these will work.
October 31, 2015
They don't git the normal
They don't git the normal big mouth bubbler.
December 22, 2015
Q&A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 4 answers
Will these fit the 1 gallon glass big mouth bubbler?
S B on Jul 28, 2016
BEST ANSWER: I am not sure. I know that they fit the 6 1/2 gallon which I have.
Hi There, do these work with the Little Big Mouth Bubbler as well?
M A on Dec 8, 2015
BEST ANSWER: Hello Martin,

Thank you for choosing Northern Brewer! Those gaskets will most definitely work for the Little Big Mouth Bubbler. Have a great day!
What is the ID/OD of the larger seal? I know these are not made for the plastic BMB, but if the gasket is bigger than the plastic BMB's mouth, I could always trim them down. I keep having to crank down on the lid of my BMBs and I'm reading the new universal lids can pop off during active fermentation.

Why didn't you guys just make a simple screw on lid w/ gasket for us plastic owners?
Justin T on Nov 9, 2015
BEST ANSWER: The ID is 4" and the OD is 6.5". I think the reason why we didn't make the gasketed plastic version is because of the narrow seat for the gasket in the plastic version. This is a bit of a Macgyver way of doing it but I have heard of guys wrapping the threads of the plastic BMB with saran wrap to get a better seal. But don't put my name down for that idea! Sort of the same deal with the universal lids

guys will wrap a bit of tin foil or saran wrap around the top of the jug over the lid a bit to keep it in place during active fermentation.

Please wait...

Your selected product has been added to your Cart.

Continue shopping
View cart & checkout