Fermenter's Favorites® Bottle Filler

$2.79

SKU# 7202

Flat Rate Shipping only $7.99 only from Northern Brewer

Filling beer and wine bottles is easy with the Fermenter's Favorites® Bottle Filler with gravity-operated valve.

Total:
$2.79

Availability: In stock

Fermenter's Favorites™ Bottle Filler - Gravity Bottle Filler

More Views

  • Fermenter's Favorites™ Bottle Filler - Gravity Bottle Filler
  • Fermenter's Favorites Bottle Filler

Videos

Product Details

Plastic 3/8" OD bottle filler with gravity-operated valve. We prefer this filler for its cleanability. Fillers work best with a bucket equipped with a bottling spigot.

13" Length.
Additional Information
Support Documents:No
Reviews
2.8 / 5.0
49 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
8
14
4
6
17
Works!
I have used this for several batches over the past 2 years and no problems. I brew a lot so I'm not concerned about losing a drop or two. The best thing is that when you fill to the top and remove the filler you are left with the correct head space in the bottle. I do not need another one but will put a spare on the shelf. As far as the spring loaded product goes...have one also but use this 100% of the time. 5 stars for the $$$
October 4, 2012
Excellent filler
If you clean your equipment every time you brew and / or bottle (the secret to great beer) this is a very good device. I bottle and or keg 15 to 20 batches a year, this item works well. I have used the same one for 2 years. Put your bottles in a large bin and bottle, yes, I lose 12 ounces or so over a 10 gallon batch, but we now have had several home brews, so whats the prob? Enjoy and have another brew with the crew, and clean that small mess!
December 10, 2012
Cheap and effective
This thing works great. I would purchase this again. Attach to the end of your siphon tube or from outlet of your bottling bucket and fill away. This little device makes filling bottles tidy and easy.
October 13, 2009
Great tool
Used this with a 2" piece of tubing for easy one handed bottle filling. Works perfectly
April 26, 2016
Cheap and effective
I already had one of the plastic Big Mouth Bubblers and loved it, so when this came out, I was naturally thrilled to give it a try. I brewed up a Roggenbier and let it ferment away. When it came time to transfer for bottling, I simply sanitized the spigot and opened it up. Smooth flow right into my bottling bucket, left the trub behind, no problems, no leaking, no worries. For my needs, this is a great fermentor.
October 13, 2009
Works!
This is a very solid brew kettle that does an excellent job of conducting heat and has easy clean-up. My only suggestion is to spend the extra money and buy the 10 gallon version. Too many times I have 7 gallons of wort boiling three inches from the top. Why take a chance with boil-overs.
October 4, 2012
Excellent filler
Have used this for several 5 gallon full boils and it has preformed perfectly. The key is to take your time and get good seals on ball valve and thermometer.
December 10, 2012
Worked flawless for me
I bottled my first batch with this filler the other day and I do not have one negative thing to say about didn't spill at all started and stopped perfect each time I did have it setup different then I have seen others do before all I did was cut about a 4 inch piece of tubbing slide it onto my bottle bucket spigot the slide the filler into the other end so there is almost no hose between the two I had the spigot hang of the edge of my chest freezer pull up a chair and grab a bottle push it up onto the filler then just pull the bottle down when full starts and stops perfet every time plus you got a free hand to grab a cap once it's almost full
March 5, 2012
I like it
I first used the spring loaded type then switched to this one and I like it much better. I can fill bottles one-handed. I found the spring loaded version more likely to clog up and stick open. I have not had too many issues with it leaking. Would not hesitate to recommend this to anyone.
October 30, 2012
Works fine for what it is!
I read all the reviews here before bottling my first batch, and got worried that I might need to buy the better (spring loaded) bottle filler. I was wrong! This worked just fine for me. Might have lost a drop here and there, but nothing major. It came in my Deluxe brew kit from NB. Left very even headspace, and it allowed me not to spill much beer at all. If it ever breaks, I will buy the spring loaded version, but for now it works fine!
May 5, 2011
Q&A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
will this work with 5/16" ID Beverage Tubing?
A C on Nov 16, 2015
BEST ANSWER: Yes it will fit inside 5/16" ID tubing.

For comparison's sake i bought 2 different bottle fillers:

7200 Spring Tip Bottle Filler
7202 Fermenter's Favorites Bottle Filler

My 1st bottling will occur next weekend, but i filled each with water to see how they work. The spring tip one (7200) is, surprise, spring loaded. When not depressed it formed a tight seal and let no water past. The other one (7202) relies on the weight of the liquid to close the end and when not depressed there was still some dripping.
Is it possible to take this apart for cleaning? I tried to pop the plastic valve from the bottom but was afraid to break it.
J M on Sep 8, 2015
BEST ANSWER: This bottle filler does not come apart for cleaning.

Please wait...

Your selected product has been added to your Cart.

Continue shopping
View cart & checkout