Mini Kegs

Tap-A-Draft System

A simple and affordable introduction to kegging. The Tap-A-Draft system allows homebrewers to package their beer or soda in three six-liter bottles (this will hold about 4.75 gallons). The Tap-A-Draft dispenser is at the heart of this system. It threads onto a six liter bottle, and holds two 8 gram CO2 cartridges. These two cartidges will provide the CO2 pressure to dispense an entire 6 liter bottle, and keep it carbonated for six weeks or more.

The Tap-A-Draft system includes three plastic six-liter bottles, dispenser, three threaded Tap-A-Draft bottle caps, and a package of ten eight-gram CO2 cartriges.

Please note, we cannot ship this product internationally, by air, or by US Post.

#7825

Tap-A-Draft System

$59.99 EACH

Tap-A-Draft Parts and Accessories

Tap-A-Draft Dispenser. This is the dispenser from the Tap-A-Draft System. Includes the dispenser and a drip tray/stand.

#7820

Tap-A-Draft Dispenser

$34.99 EACH

Tap-A-Draft Botttle. Add bottles to your Tap-A-Draft system. These bottles are 6 liter PET bottles. They are translucent and have a blue tint. You will need a #7822 38mm screw cap to seal the bottle.

#7821

Tap-A-Draft 6L Bottle

$7.99 EACH

Screw Caps for Tap-A-Draft Bottles. These are 38mm screw caps with an integral sealing gasket. Reusable.

#7822

Screw Cap For Tap-A-Draft 38mm

$0.25 EACH

CO2 Cartriges. Fit the Tap-A-Draft dispenser. Ten 8 gram cartridges per pack. Please note, we cannot ship this product internationally, by air, or by US Post.

#7817

CO2 Cartridges, 10 ct. 8g

$6.99 EACH

Tap-A-Draft Tote. For parties, picnics, an afternoon of fishing, canoe expeditions, dog sled treks, cyclocross, the Little League World Series, trips to the dentist... take your homebrew with you and keep it cold. Blue nylon with carrying straps and drawstring closure, lined with gel ice packs. Holds one 6 liter bottle plus dispenser.

#7823

Tap-A-Draft Tote With Blue Ice

$56.99 EACH

Repair and Replacement Parts. The CO2 o-rings inside the dispenser can be replaced if they become worn or are lost. The Tap-A-Draft repair kit includes two CO2 o-rings, one large o-ring for the dispenser body, one replacement down tube, and complete instructions.

#7824	Tap-A-Draft CO2 O-Ring		$0.50 EACH
#7826	Tap-A-Draft Repair Kit		$3.50 EACH	UNAVAILABLE

Mini Keg Parts

Party Star de Luxe CO2 Tapper. The original, high-quality mini keg tapper from Germany. Solid metal and plastic construction. Takes 16 gram carbon dioxide cartridges.

Mini Keg Bungs. Our new Mini Keg bungs are made of a softer rubber for easier insertion. These reusable bungs have a malleable rubber exterior and a hard plastic center. The down tube on the Mini Keg tapper pushes the hard plastic center-piece into the keg, where it may be retrieved upon cleaning.

#7813

Mini Keg Bungs

$1.00 EACH

Carbon Dioxide Cartridges. 12 gram CO2 cartridges are for the PhilTap system and come 12 per box.

Please note, we cannot ship this product internationally, by air, or by US Post.

#K097

12 Gram CO2 Cartridge Box of 12

$10.50 EACH

Mini Keg Brush. A brush specially designed for cleaning out the insides of mini-kegs.

#7095

Mini Keg Brush

$2.25 EACH