Drilled Bung for Plastic Carboys

SKU: 40490

Plastic bung with airlock hole, fits plastic carboys.

Availability: In stock

$1.59

Drilled Bung for Plastic Carboys

Details

Longer taper for snugger fit and better seal — a lip prevents bung from falling into carboy. Hole fits airlock (#7008 or #7010) for fermentation. Fits plastic carboys.

Additional Information

Support Documents: N/A

Customer Reviews

It works! Review by Mark
Rating
Did the job just fine! (Posted on 1/16/14)
Works Fine Review by Leonard
Rating
Works fine with Bubbler. No issues. Easy to clean as well. (Posted on 1/7/14)
Good fit, but maybe a little rigid? Review by tallcoldone
Rating
I think this will work well for me - I have two beers going into Bubbler secondary this week, so I will get a good chance to see if there is a problem with the rather stiff nature of the rubber. (Posted on 10/15/13)
Seemed to work ok Review by Scott
Rating
I used these on a plastic water jug. They seemed to be as described. I wouldn't mind a softer durometer to help seal and stay in place a little better but since i didn't use the recommended bottle i can't complain much. (Posted on 10/7/13)
Bungtastic Review by Tristan
Rating
Like these much better than the solid stoppers. (Posted on 7/12/13)
great quality Review by William
Rating
great product. perfect size, works fantastic (Posted on 7/11/13)
Perfect Review by Paul T
Rating
Works great for me, always has. (Posted on 4/13/12)
works great Review by nick
Rating
Best option for a better bottle. If you go with the one piece airlock snip off the bottom of it so it doesn't get plugged up with krausen gunk. Fits perfect, and I don't really know how you would have a problem with it. Sure it will pop out but should you have been using a blowoff tube with your wyeast 3068, yes. Everyone knows better bottles flex so don't be an inept fool, and it will work great. Products work well if you use them as they should. Cars don't work to well on the left side of the road, better bottle bungs don't work well if you don't think. (Posted on 4/2/12)
works great for me Review by Stephen
Rating
I'm not sure what the exact problems other people are having, but I used these on all my better bottles and they make such a better seal than anything else. (Posted on 12/25/11)
Worked for me Review by Mitch
Rating
I've used these on 30 or so batches... and they have worked fine for me. The only thing to remember is to put your airlock in after you have your carboy in place. The flex of the bottle allows the bottle to "breathe in" when picked up and sucks in your airlock liquid. I've used star san and they were a little slippery but still worked fine. I've had better luck boiling them and placing them on. (Posted on 12/7/11)
Didn't seal at all Review by Aaron
Rating
This is what was included with the 6 gallon better bottle I ordered, and it didn't work at all. It may fit the bottle, but it certainly doesn't seal- as fermentation started it began to slide out and would refuse to seal properly. I had to remove it and replace with a rubber stopper- this plastic material is no good. Not recommended at all! (Posted on 10/24/11)

You may also be interested in the following product(s)

Bubbler Air Lock

Bubbler Air Lock

$1.29
Three-Piece Airlock

Three-Piece Airlock

$1.29
Better Bottle™ Ported Carboys

Better Bottle™ Ported Carboys

From: $67.97

To: $123.94

Better Bottle™ Plain 3 Gallon Carboy

Better Bottle™ Plain 3 Gallon Carboy

From: $20.99

To: $28.45