Skip to product information
The Hullwrecker® Profile

Hullwrecker® 2-roller Grain Mill & Base

SKU 42338
$174.99

Pricing details

Understanding the Prices on Our Product Pages

When shopping on our site, you might notice different types of prices listed for products. Here's a quick guide to help you understand what each price means:

  • Regular Price: The Regular Price represents the price before any discounts. This price typically reflects the median price from the past 90 to 180 days, depending on product category, excluding special promotions like holiday sales, limited-time deals, multi-unit deals, and clearance events.
  • Sale Price: This is the updated price of an item after a reduction from the regular price. Sale prices are shorter in duration and offer the opportunity to save on products you love.
  • MSRP: Also known as the Manufacturer's Suggested Retail Price (MSRP), this price is provided by the manufacturer. It serves as a benchmark to highlight the value of our current pricing.

Please note that product prices are subject to change without notice.

Eligible for Free Standard Shipping DetailsOpens in a new window.
%3Cp%3EEarn%20up%20to%20[points_amount]%20when%20completing%20this%20purchase%3C/p%3E

Product Details

For perfectly milled grains, ease of use and superior dependability, look no further than the Hullwrecker® grain mill. Our new two roller mill takes the guesswork out of achieving the ideal crush for your brewery. The Hullwrecker® grain mill features a fully adjustable roller gap from 0.025 all the way to 0.1, allowing you to finely tune the crush to your extract preference.

Unlike other available grain mills, the Hullwrecker® comes complete with a custom-designed metal base that fits perfectly on any standard 5 or 6.5-gallon plastic bucket.

Features:

  • Sealed ball bearings
  • Ergonomic crank handle
  • 7 Ib capacity grain hopper
  • 5" long, 1.25" diameter hardened steel rollers
  • Anodized aluminum body
  • 10mm diameter dive shaft
  • Included heavy-duty metal base fits on standard 5 or 6.5-gallon plastic buckets
  • Use with included crank handle or electric drill

**Does not grind corn**

California Proposition 65

⚠ Proposition 65 Warning: This product can expose you to chemicals that are known to the State of California to cause cancer and birth defects or other reproductive harm.

Additional Information

Support Documents — Instructions
Click here for instructions
SKU

42338

  • 5 stars: 238 (80%)
  • 4 stars: 45 (15%)
  • 3 stars: 14 (5%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
L
Lorenzo

This was an ok product. Assembly was fairly easy but the super tiny screws were kinda a joke. 2 of the 12 screws I received were unusable due to poor quality. At least they could send a few extra for the price of this thing!! The rollers were very easy to adjust and it did well milling grain. Is it worth $110, not really, over priced for what it is. Shop around for a better quality unit. I am sure they are not hard to find. Overall not a bad unit if you don't mind possibly putting in some extra time and using your own hardware.

L
Lorenzo

This was an ok product. Assembly was fairly easy but the super tiny screws were kinda a joke. 2 of the 12 screws I received were unusable due to poor quality. At least they could send a few extra for the price of this thing!! The rollers were very easy to adjust and it did well milling grain. Is it worth $110, not really, over priced for what it is. Shop around for a better quality unit. I am sure they are not hard to find. Overall not a bad unit if you don't mind possibly putting in some extra time and using your own hardware.

E
Eddie
Rocking grain mill

Amazing pierce of equipment! I crushed my first 12 lbs of grain today with ease!

E
Eddie
Rocking grain mill

Amazing pierce of equipment! I crushed my first 12 lbs of grain today with ease!

R
Ryan
First Mill Purchase

Overall, I'm very happy with this mill. I've not owned one before and glad that I made the purchase. Easy now to stock up on base malts and a few specialty grains to always have a pop up brew day!

S
Steve

Nice mill! Perfect crush first time! Very happy with it.

R
Raymond G.
Hullwrecker

Good machine, it operates very smoothly. The adjustments on the other roller gap is very good. Only issue, when I use my drill instead of the hand crank; the weight of the drill tends to make it fall out of the bucket.

E
E.S.

Fantastic mill—gives me a perfect, even crush every time. My efficiency improved immediately. Highly recommend.

R
Raymond S.
Great miller

Was easy to set up and most of all helped greatly increase my grain yield when making my beer. Would highly recommend to step up your game in the brewing world.

C
Christine G.
What an improvement!

This is much better than the tiny mill we'd been using this whole time. The hardest part was tightening the tiny little nuts/screws. I'm not sure if there's an easier/better way to use this. I currently need one person holding the mill down on top of the bucket while another person cranks the mill. It would be ideal if it could be a one-person operation, but maybe I just haven't figured out the trick yet. I'm curious to see how much faster it will be when we use a drill!

C
Conrad K.
Hullwrecker grain mill

The Hullwrecker grain mill is excellent quality and performs beautifully. It was easy to assemble.

K
Keith K.

Hullwrecker® 2-roller Grain Mill & Base

M
Michael W.
So far so good

I’ve used my mill once and it worked great!

B
Bill K.
Hullwrecker adjustment markings not very good

Found that the Grain mill adjustments are very unreliable. Need to use feeler gauges or as many recommend, a credit card for consistent milling on each side.

R
Rob
Good equipment

Fairly easy to assemble, crushes grain excellent

d
dan t.

Hullwrecker® 2-roller Grain Mill & Base

C
Chris C.

Hullwrecker® 2-roller Grain Mill & Base

O
Olivia C.
Great product

This Mill was very easy to assemble and works as expected. The only possible downside might be the Roller Mill adjustments. Although I was able to get them exactly where I wanted it took a little fooling around going back and forth between the sides. This would not stop me from buying another one though. That's my thoughts. Overall very happy with the product

J
Jeff P.
Hullwrecker

Seems to be of good quality material that will last a long time! I haven’t broken it yet so I am confident that it will last lol.

J
JD i.T.
Crushing It!

This is an excellent value for a basic grain mill, it seems to be well-built and crushes well. Assembly is straightforward, though I recommend putting it together on a well-lit table covered with a plush towel - the fasteners for the hopper are tiny and install in tight corners, so when you drop one the towel will keep it from bouncing to the floor. There's a bit of learning curve setting it up, as the gap narrows slightly when you tighten the locking nuts on the rollers and you have to compensate for that. After a few tries I got the gap dialed in and got a really good crush at .030" - a feeler gauge set is a good idea so you can confirm the gap that works best for you and check it before each batch. Time will tell, but after two batches I'm very pleased with it.

D
D B.
Great Grain Mill

Excellent quality and build. Looking forward to many years of use.

g
gabriel p.
Hullwrecker®

Works great!... able to get a nice fine crush for my Clawhammer BIAB system...

J
Jeff H.

Works as intended

P
Peter A.
Hullwrecker rocks

It was very easy to adjust the rollers, and the two rollers appear to create a more consistent cracking. I don't want to take away from the fact that my English session IPA was very good, of course the grain helps but it was my brewing acumen that won the day. (Not really, it was a host of things coming together but if I don't blow my own trumpet then nobody will!) Northern Brewer continues to deliver

S
Steve M.
So far so good.

Finally had a chance to use this today. It replaces a Barley Crusher that had simply worn out. I had no trouble milling the grains for my brew day, but I do tend to mill very fine for biab, and I couldn't get as fine a crush with the Hull Wrecker as I did with the Barley Crusher. So I had to double-crush them. That worked fine though, just an extra step.

B
Brett C.
Super…

Used my hull wrecker just once and it was easy to calibrate. Hooked up my drill and went a cracking… very solid…

R
Russell F.
8 Lbs of trouble free milling

Works well and my Makita 18V drill powered it with ease in low gear. Processes grain fast. My daughter ran the drill as I poured the grain in. Caught her off guard when I first dumped the grain in, but after that we were off and running.

M
Mark S.
Very well built but…

Just have one critique, but I admit that it is small. The tolerances on the opposite side of the crushing area are a little large. Was having my daughter help roll because as many people with kids know, they love to be involved with everything. She tended to slightly roll backwards before each rolling stint, which unfortunately allowed a decent amount of uncrushed grain to bypass the roller and subsequently, the crush area, falling into our crushed grain bucket whole. Love the quality of the roller though and it’s great, just wanted to point that out.

T
Tony T.
Awesome

Works great. Super slow shipping from northern brewer...

J
Joshua G.
Wreck those hulls!

We just started brewing all grain and the standard crush provided by Nothern Brewer was just not enough to hit the SG. With this upgrade we were able to hit 80% efficiency no problem!! A brew day will never happen again without the help of the Hullwrecker!! Definitely recommend!!