Siphoning Equipment

Siphon Tubing

High quality, food grade vinyl tubing is flexible and can meet all your beer transfer needs. Our high-temperature tubing is safe to use at temperatures up to 212° F, making it ideal for hot wort transfers.

Tubing is sold per foot, but the blow-off hose comes in a pre-cut 3.5ft. section. Call or leave a special instruction to order blow-off hose by the foot.

#7100	5/16" ID Siphon Hose		$0.35 EACH
#7102	3/8" ID Siphon Hose		$0.35 EACH
#7106	1/2" ID Siphon Hose		$0.50 EACH
#40270	Blowoff Hose - 3.5 foot section		$4.99 EACH
#7103	3/8" Hose Hi-temp Vinyl Safe to 212 F		$1.70 EACH

Thermoplastic Rubber Tubing

This food-grade tubing is ideal for hot liquid transfers, especially out of a boil kettle or mash tun. It is rated for use up to 275° F. This thick-wall tubing (1/8" wall) is nice and rigid, and won't kink or collapse under moderate suction, making it a great tubing for use with pumps. Sold per foot.

#7137	3/8" ID Thermoplastic tubing		$1.20 EACH
#7128	1/2" ID Thermoplastic Tubing		$1.40 EACH

Fermtech Auto Siphon

Accept no substitutes! This is the siphon starter that really works. It is the simplest, and most sanitary way we have found to start a siphon. One stroke of the racking cane/piston assembly will start a siphon when immersed in as little as six inches of beer or wine; less than six inches may require a second stroke. Includes a removeable diverter piece (essentially a big racking tube tip) to minimize sediment pickup. The normal auto-siphon works best with 5/16" ID hose, but 3/8" will work as well. The high-capacity auto-siphon requires 1/2" hose. Plastic; can be disassembled for cleaning and sanitizing.

#7201	Auto Siphon 5/16"		$8.99 EACH
#7203	Auto Siphon 1/2"		$12.99 EACH

Mini Auto Siphon

3/8" Auto-Siphon sized for 1 gallon jugs — 13.5" tall. Works best with 5/16" ID hose, but 3/8" will work as well.

#40110

Mini Auto-Siphon 3/8"

$8.99 EACH

Tubing Clamps

Fits over tubing to control flow rates or to crimp it shut. The large size fits tubing up to 3/4" O.D., and has the greatest amount of flow control. The small clamp fits tubing up to 1/2" O.D.

#7110	Small Tubing Clamp		$0.45 EACH
#7112	Large Tubing Clamp		$1.80 EACH

In-Line Valves

These in-line valves contain an adjustable, internal ball valve, which permits precise regulation of flow rates. Recommended to control the outflow rate of a lauter tun. Made of food-grade plastic.

#7120	In-Line Valve, 1/4 inch		$1.25 EACH
#7138	3/8" In-line valve (Green)		$2.50 EACH
#7124	In-Line Valve, 1/2 Inch		$4.50 EACH
#7141	5/16" in-line valve		$2.50 EACH
#7140	9/16" In-line valve (Green)		$4.50 EACH

Racking Canes

Our plastic racking canes require 5/16" siphon tubing to get a good seal. Racking Tube Holder sold separately.

#7111	24" Straight Racking Tube		$2.50 EACH
#7119	24" Curved Racking Tube		$2.25 EACH
#7113	30" Curved Racking Tube		$2.75 EACH
#7121	24" Stainless Rack Tube		$14.50 EACH
#7115	30" Stainless Rack Tube		$16.99 EACH
#7045	Racking Tube Holder		$2.25 EACH
#7114	Replacement Racking Tube Tip		$0.89 EACH

Kwikcut Hose Cutter

This is the same hose cutter we use in the store. It cuts hose cleanly (without jagged edges that can harbor bacteria) and at a 90° angle. Works well on hose of any diameter up to 1 inch.

#7150

Kwikcut hose cutter

$14.99 EACH

SureScreen

The SureScreen is a welded stainless steel screen that slips onto your racking cane or keg dip tube and filters out fruit or dry hops from the fermenter or whole hops and trub from the kettle. Also allows dry hopping to be done directly in the keg. Stainless steel construction makes it easy to sanitize (do not use bleach!). Not recommended for use with plastic racking tubes or plastic fermenters - it can cause scratching and possibly infection. Pellet hops have a tendency to clog the SureScreen - it works far better with whole hops.

#7540

Surescreen

$7.99 EACH

Siphon Saver Tips

Fits a 3/8" or 1/2" Autosiphon (or a 1/2" OD racking tube). Slots in the side increase flow rate.

#7130

Replacement tip for 5/16" Auto Siphon

$1.50 EACH