4 90

Standard Wort Chiller 3/8"x25' with vinyl tubing

SKU# 7869


Flat Rate Shipping only $7.99 only from Northern Brewer

Quickly cool your wort down to yeast pitching temperature and reduce the chance of contamination.

Our immersion wort chiller is made from 25 feet of 3/8" copper tubing. Includes vinyl tubing for cold water in and warm water out, and a female garden hose thread fitting that will fasten to most utility sinks. 

No need to sanitize; just drop your clean chiller into the kettle a few minutes before the end of the boil. 


Availability: Out of stock

Immersion Wort Chiller

More Views

  • Standard Wort Chiller 3/8"x25' with vinyl tubing


Product Details

It doesn't matter if you're making extract or all grain, you have to bring the wort down to temperature in order to pitch the yeast, and you have to bring it down quickly so you aren't incorporating any nasty bugs into your beer. Unless you're looking at a small 1-gallon batch that can be put into an ice bath, you're going to want a good wort chiller. No matter if you're just starting out with home-brewing or you've given up commercial brews years ago, a wort chiller is an absolute necessity in the brewing process.

With our immersion wort chiller, we give you the best return on investment. Simply hook up the hose to your tap, place the coil of 3/8" copper tubing into the wort and run the other end to a drain. The cold tap water will quickly feed through the coil, maximizing it's time in the wort to turn out warm water on the other side. Instead of giving all those germs an hour or more to find your tasty wort, chill it down in minutes. No dilution of your wort and no complicated balancing of cold water to concentrated wort. There isn't even any additional mess, you don't need to transfer the wort to a different container or special contraption, just drop the immersion chiller into the brew pot.

The preferred method of sanitation is to make sure it is clean to the eye and then include the copper portion of the unit in the wort during the last 15 minutes of the boil, this will kill any wild yeasts or unsanitary pests that might be introduced. Once it's taken off the boil you can immediately start cooling it off just by hooking up the line and turning on the water.

Our wort chiller is 9.5" in diameter, the coils are 6"-7" tall and 13.5" in total height. The coil is made of 3/8" copper tubing and is 25 feet long to ensure maximum surface area for the hot wort to contact the cold water. The copper ends are connected by a secure clamp to the vinyl hoses. These are easily replaced if punctured or damaged and will help to ensure your chiller a long life. Due to being made from soft copper tubing, the immersion chiller can be slightly deformed during shipping, but is easily bent back into shape with gentle force.

Use the optional Faucet Adapter to connect your chiller to a standard kitchen faucet when brewing inside. 

Additional Information
Support Documents: No
Size No
Product Reviews & Questions

Please wait...

Your selected product has been added to your Cart.

Continue shopping
View cart & checkout