5

You are shopping Northern Brewer US shopping site, to view our Canadian shopping site - Click Here

Blichmann HopBlocker - Hop Filtration System

$59.99

SKU# 77007

Standard Shipping Rates Apply to this product
This innovative item from Blichmann Engineering is able to filter out 90-95% of pellet hops without getting clogged or stuck! Reduce the debris entering your pump and plate chiller while getting clearer wort in the fermentor.
Total:
$59.99

Availability: In stock

Blichmann HopBlocker

More Views

  • Blichmann HopBlocker
  • 77007
  • 77007

Videos

Product Details
This innovative item from Blichmann Engineering is able to filter out 90-95% of pellet hops without getting clogged or stuck! The HopBlocker features two stages of filtration, the first a coarse filter that draws liquid from above the level of the hop sediment, and the second a fine filter for the thick liquid at the bottom of the kettle. Simply whirlpool your wort, drain until you get close to the bottom, and then pull up the screen using a hook to engage the fine filter. User needs to supply a hook to pull up the screen and a mash paddle or similar object to hold the Hopblocker down with while doing so.

Made for use with the Blichmann Boilermaker kettles, those who have other brands of kettles will have to supply a 90 degree angle dip tube on a compression fitting. Works best on flat bottomed kettles. Measures 5.625" tall by 3.75" wide at base.
Additional Information
Support Documents:No
Reviews
3.2 / 5.0
24 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
7
6
2
3
6
Game changer
It was a little hard to get it on there (I have a 55 gallon electric boilermaker) and it's hard to get off, which makes cleaning a pain. But it's a total game-changer. Using it for country wines, and it didn't let a single shred of beet out the spigot, and I still got all of the must. Great product
October 10, 2015
Good not Great
So this works great to reduce the hops and trub, but I still have issues with it. I have no issues until I start to reach the bottom and move the screen, then the trub messes with the amount of pressure so you have to adjust the valve to keep the liquid moving. If you the liquid come out too fast then the liquid in the blocker will run out before the kettle is drained and you're f'd. Normally I end with about 1 to 1/2 gallon left. Currently that's enough for my mesh basket to handle so it's worth it.
October 6, 2014
4 out of 5- Glad I bought it.
I used my Hop Blocker for the fourth time last night, Ive been relatively pleased. My only complaint being that 2 of the 4 times Ive used it there seems to have been 1/2 to 3/4 of a gallon of wort left in the kettle. That may however be due to other equipment slowing things down or operator error. Ill have to do some experimenting to identify the cause. I think it'd work better with a pump. I had originally read some of the negative reviews and refrained from buying it for awhile, and although its my least fav Blichmann product I own I'm glad a bought it and it has been an effective filter for me.
July 17, 2013
Not worth it
Used it with whole hops last night. Plugged up. Will not use again.
May 16, 2012
Decent but not worth the price
I need to start this review out by saying that I really love many of Blichmann's products. I bought this to replace the original screen from the Blichmann Boilermaker. The original screen clogged very easily and so I was hoping this would be a better solution. I have not found this to be the case. I think Blichmann missed the mark with this product.1. This device simply doesn't clear much break material unless you whirlpool and allow time to settle. At this point you could pull from the edge anyway, so why spent the $60 to do this? Not to mention the hops that are already lodged inside the blocker.2. Works decently for whole hops but isn't great for pellet at all. Same complaints as others who have posted.3. While it isn't very hard to install this unit, it isn't trivial either. I'm not even sure that it is worth the time. Sew together some stainless mesh in a pancake shape and put this over your dip-tube. While it may take a few minutes to accomplish this, I can promise it will be cheaper and work better than the hop blocker.
February 14, 2012
works well but must follow directions closely
This works with pellet hops, even when they are not bagged. The key is to be patient and toallow sufficient time for the hops to settle to the bottom, which on my boilermaker probably takes 20-30 minutes. Whirlpooling definitely helps..the other key point is to drain the kettle very very slowly so the settled hops are not disturbed.
November 16, 2011
Worthless
Dont bother wasting $60 to experiment. I have 15gal Blichmann pots I have tried it with. It simply does NOT block the hops as advertised. I use a disenfected large stainless mesh filter that spans my buckets and I get 80-90% of the hops straight away AND there isn't any wasted beer left in the pot.. I was very pleased with all my Blichmann products until this one.
November 10, 2011
Better and Cheaper Options Available
I first reviewed this item back in July 2010 (See Below). I did not like the product because it did not work that well without a whirlpool, and it is hard to get a whirlpool going. You will see that this is a common concern for all of the reviews. Also, my installation was more or less permanent -- I am not using a Boildermaker Kettler -- so it requiered a fairly complex disasembly for proper cleaning. Long story short - I had mold growing on the underside of the hop blocker. What I do now is I use a hop sock constructed of a 6 inch PVC Pipe for a mouth ring, supported by 3/4 PVC Pipe. To this is attached a paint straining bag. It really works great at keeping my hops out of the finished product -- and the total cost is less than $20 -- considerably less than the hopblocker. Try the hop sock and you will not be disappointed.
April 6, 2011
my hops.... are too much...
long story short i end up having to use hop bags with this still.It blocks some hops, blocks some break material.I would recommend using a whirlpool set up with this unit.Happy brewing.
April 2, 2011
Save your money!
I got the hopblocker for Christmas. I've made two beers since then and cannot believe the amount of hops this thing does not block! I tried the whirlpool method with my paddle in a 15gal boilermaker pot and it did not work. I kept hitting the drain tube/hopblocker and could not get a great whirlpool going. I saw a 7 barrel system with a whilpool circulation loop setup and it worked well, but I can't get that much velocity in my pot. I'm going to fit my bazooka filter onto my boilermaker as it actually blocks the hops.
January 23, 2011
Q&A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 7 answers
I thinking of moving from a 10 gal. Boilermaker with immersion chiller and hop spider to a 15 gal. Boilermaker with same immersion chiller and hop stopper. I will have 5.5" from the inside wall of the pot to the chiller coil. Is this enough room for the hop blocker and screen lift handle? Maybe the lift handle be oriented to the left or right instead of toward the center of the pot?

Thanks
Michael G on Jul 21, 2016
BEST ANSWER: I have a 15 gal boilermaker with a hopblocker. I just measured the inside of mine and if the handle of the hopblocker is spun about 90 degrees so that it is not facing the center of the kettle, it measures almost exactly 5 1/2", maybe a hair more. So it may be a little tight for you to get that immersion chiller in there. Hope that helps!
Does it really filter the fine hop pieces - not the plugs or whole leaves? The holes look large!
Jeffrey L on May 22, 2017
BEST ANSWER: The holes are fairly large, however we were using a custom mesh with much smaller holes previously and ran into all sorts of trouble. This actually works much better.
will this work with the dip tube on the 15g Edmental kettle?
V A on Dec 22, 2015
BEST ANSWER: The Blichmann HopBlocker is not compatible with the dip tube on Edelmetall or Megapot kettles.

You may also be interested in:

Please wait...

Your selected product has been added to your Cart.
Continue shopping
View cart & checkout