You are shopping Northern Brewer US shopping site, to view our Canadian shopping site - Click Here
- Product Details
- Bourbon barrel-aged beers have been a hugely popular style ever since their inception in the early '90s by American craft brewers. By starting with a stronger-than-average robust porter, then infusing it with Bourbon-soaked oak (we recommend Maker's Mark), the end result is quite possibly the best beer ever. You'll have to supply your own bourbon - save a little to sip on brew day to really capture the spirit. The intense aroma and flavor of toasted American oak and the sweet graininess of good bourbon meld with the bittersweet roastiness of porter to make for a very characterful beer. Recommended: 2-stage fermentation and yeast starter.
- Additional Information
Beer Kit Yield 5 Gallons Recipe and Instructions Click Here for Bourbon Barrel Porter Extract Kit Brewing Instructions Regional Style USA Original Gravity 1065 Total Time to Make 2 months
- 4.7 / 5.0213 Reviewshonestly smelled the empty glass after every pint!i am an extract brewer, and this was only my third kit. i used the makers mark for the bourbon. 10 days primary, 30 days secondary with the oak and bourbon addition at 15 days. bottle conditioned for four weeks. the first two i opened didnt seem to carbonate completely so i let them sit for another 2 weeks.in the nose it is a distinct wood smell with the presence of the bourbon. when the pint that hit my lips, it was bliss. a nice earthy wood taste to start wrapped up with a smoothe malty , almost chocolate feel. goes down and you get the bourbon. no burn! just the good part of bourbon, the taste! the empty glass swirls with the remnant smell of the toasted oak. i honestly sat there and sniffed my empty glass for a few minutes, its that good!i handed a few bottles out to friends and co-workers. this one was a big hit. i am definately going to be doing two batches of this for next winter. it goes all too quickly!Cheers!January 29, 2013Outstanding Bourbon Porter!I am not a Porter guy, but in the Fall my son convinced me that we should brew something hearty for the holidays. We made this extract kit using the Danstar yeast in a 2000 ml starter for a few days. After primary, we did about three weeks in secondary with the wood chips soaked in Jim Beam Black (aged 8 years - not the regular Jim Beam) - I added a little extra Bourbon - between soaking and the straight addition, all in all about 3/4 of a 750 ml bottle. Man this beer is good - after aging (and carbonating) in the bottle for a week it was good, and it has continued to get better now after about 7 weeks in the bottle. A great kit! Make it! One bit of advice, I would not add more Bourbon than I did - I think it would be possible to overdo the Bourbon, but 1/2 to 3/4 bottle seems to work great.February 12, 2013This is why you HomebrewI brewed this in anticipation of my first baby as a celebratory beer (instead of cigars). I brewed this on 5/10 and kegged 11/15 and tapped on 12/17. I used the Wyeast option with a yeast starter. On brew day I went ahead and soaked the Oak Chips in 20 oz of Makers Mark to get them ready for the secondary. This beer turned out phenomenal and I would highly recommend, I did add more than the recommended 16oz of Bourbon since I love whiskey and I love beer. If you don't love whiskey as much as I do I think the 16oz might be a good option for you (I know y'all love beer as much as me) . This beer pours with a nice head and wonderful aroma. My OG was 1.072, FG - 1.012.Do yourself a favor and brew this! This beer makes me proud to homebrew!December 21, 2014a five star brewgreat kit but dose take several weeks to carbinate. mine spent 2 weeks in primary, 4 weeks in secondary and then 4 more weeks to bottle condition. a very smooth dark beer. second batch in secondary but this time I added cherry puree in the secondary doubled the oak chips and 20 oz of makers mark 46December 21, 2013looking good for Christmas gifts!I brewed this to give away with the brick warmer red (3 bottles each) for the holidays. I pretty much followed the directions and after 2 weeks in the bottle it tastes great. Pronounced bourbon and oak flavor that will mellow out with additional aging. I love tasting the brews over time and tasting how the beer evolves! I think this will be amazing in a few months so I am putting a note on the 6 pack to try one now and let them age and see the difference. This is why I love homebrewing. It is an experience that lasts beyond drinking the beer :). Cheers and happy holidays!!December 20, 2014wow....This is an incredibly rich, dark beer. As others have commented, it only gets better with time. It develops a smoothness over time that is difficult to describe. The richness tends to balance against the roasted/toasted attribute. I would recommend drinking this as you would a liqueur--with a cigar or after dinner.I wanted something very high quality to serve as a gift. So, I added 16 ozs of Woodford Reserve. Why cut corners at that point? Expensive, yes, but this is a specialty beer. If you want to make a beer that you probably won't find elsewhere, consider this as a candidate.September 9, 2010One of the best porters everI have done this kit several times, and really, really enjoy it! I add 6 oz of oak cubes instead of the two oz that come with it, and I soak them in Crown for 72 hours, then add them to the fermentor 2-3 weeks before bottling. This is just a fantastic porter, with a lot of depth to the flavor, a great mouth feel, and the aroma with the oak and Crown is perfect. This is a VIGOROUS so fermenter, so you may want to keep it a little cooler, or use a blow off tube for the first couple days.November 14, 2015Outstanding!I am not much of a Porter guy, but with winter coming up my son encouraged me to give it a try, so I bought this kit. I use the dry Windsor yeast to make a 2 liter starter. I did the specialty grains and boils per the instructions. I oxygenated with an 02 tank and diffuser stone for one minute before pitching. Also added Wyeast nutrient and a Whirlfloc tablet in the last 15 minutes of the boil.Racked to secondary after about 10 days, and let it sit in secondary for two weeks before adding the oak chips. I soaked the oak chips in Jim Beam Double Black for two days before adding them, and I used about 600ml of the 750 ml bottle of Bourbon, which all was added to secondary. After the whiskey and oak was added, it sat in secondary for about 10 more days before bottling, and I waited only one week in the bottle to try the beer out on Thanksgiving Day.The beer was lightly carbonated, like an Irish Stout, and the flavor was balanced, full, and just outstanding. It can only get better as it ages in the bottle, but I must say I am extremely impressed with the balance and deep character of this marvelous beer? Highly reccomend end!November 24, 2012Awesome PorterI am not usually a Porter fan. I am more of an IPA and Stout guy but this recipe sounded so interesting that I had to try it. I originally brewed it as a Christmas present to friends and family. But now that it is done, my wife and I are wondering if anyone else will actually see any of this stuff.I read an earlier review where it was recommended to use half again as much bourbon. I used an entire 750ml bottle of Makers Mark (less the shot I poured for myself) and if you like a strong bourbon flavor that is the ticket. However, that much bourbon tends to overpower the oak. Will probably use a little less next time.Your house will smell amazing on brew day with this kit. :)November 21, 2009it will be hard, but you must waitI brewed it as directed and planned on giving it out at Christmas after 2.5 months in the bottle, but it tasted bad. I just had a bottle this weekend after ~5.5 months and it is fantastic. I am upset that I sampled so many along the way, because they were flat and had a harsh oak and booziness that were nasty. Now it has come together and is still bold yet very smooth and has a dark brown head that lasts longer than the beer itself...patience is a virtue.March 19, 2012
- Browse 26 questions Browse 26 questions and 80 answersI brewed two weeks ago. Fermentation seemed very slow. Temp of my wort when I pitched was 70 degrees (dropped really quick). I placed my primary in the same location I do for all my brews, typically around 60 to 66 degrees. After a week, I moved to my boiler room. Temp there averages 64 to 68 degrees. Absolutely no more CO2. I even cracked the lid to stir up (very carefully) the yeast back into suspension. Worried I brewed a non-alcoholic brew. Anyone else have similar experience with this?BEST ANSWER: Have you taken a SG? My final on that brew was 1.020, IG was 1.07 vs. the target of 1.065 (I had less than 5 gal in the fermenter). You might have to pitch additional yeast, not uncommon with high alcohol brews.
On a side note, I'm somewhat disappointed in the brew but think it is the fault of my water. I cannot taste the bourbon - but found after brewing that our water system had increased the chlorine content quite a bit. I think that screwed up a chocolate milk stout, too.Do I really have to rehydrate the dry yeast or shall I just sprinkle it on the wort once its temp is 78F?BEST ANSWER: This recipe happens to be my favorite of all! I recommend following the instructions for the best results. Rehydrating the yeast makes it all the more potent. And since this beer will be fermenting longer than most, you will want to start with the strongest yeast possible. CHEERS!Is it absolutely necessary to siphon from the primary fermentation bucket to a secondary bucket? Or can I just leave it in the primary fermentation bucket for another 3 weeks for the secondary fermentation period?BEST ANSWER: For a brew involving addition of ingredients after primary fermentation, like this one, most homebrewers will use a secondary fermenter. The broader question of need for secondary is a subject of debate. Some brewers say one should never exceed 3 weeks in the primary fermenter. Others say longer primary is not an issue. You can find plenty of discussion on various brewer forums. See for example http://forum.northernbrewer.com/t/secondary-ferment-vesel/21376/4What is the ABV of this beer?BEST ANSWER: Using this calculator (http://www.brewersfriend.com/abv-calculator/) and my OG of 1.07 and FG of 1.02, I get 6.56% - BEFORE adding the 16 oz of Makers Mark. The Makers is 45% ABV, so I replaced 16 oz of 6.6% ABV with the Makers. The net addition of alcohol was 16x.45 - 16x.066, or 6.1 oz.
Alcohol content in the 5 gal batch was 640x.066=42.2oz.
With the Makers, it is now 48.3 oz.
Thus the new ABV = 48.3/640=7.5%Out of the drop down yeast options, is more money "better" yeast? I just brewed the Irish Red as my first and want to try this. I'm unsure about the yeast, thanks.BEST ANSWER: For many reasons I couldn't brew for quite a while after purchasing the Bourbon Barrel Porter kit, and was worried about the yeast, however taking the chance that it would be ok I went ahead with it and I will say after only 3 tastings it is quite possibly the best beer I've ever had. Saving it and letting it set for awhile the first first sample was at bottling the second was about 4 weeks after and the 3rd was about 3 weeks after that. Going to let it age for another month or 2 & try again...no doubt in my mind I will do this again.I am very excited to brew this beer. My Question: I do not own a secondary fermenter, and I was hoping to give some of the beer away as a gift roughly 5 weeks after brewing. Is this enough time, and will it be OK without a secondary fermenter? I see that it says "recommended" but it is also not necessary.BEST ANSWER: A secondary fermenter is almost never necessary, but you usually get a higher quality product in the end if you use one. Switching to the second fermenter also gives you the opportunity to put the oak cubes/bourbon/other additives in without worrying about adding too much volume to your fermenter. 5 weeks may be pushing it depending on how much extra malt or sugars you add to the recipe and what kind of yeast you use. Remember, it will take a week or more for the bottles to carbonate properly if you intend to bottle. Lastly, I usually let this recipe sit for 4 to 5 months and age; it tends to be quite harsh at first but mellows out well.I made this beer on Friday and use fast pitch, the first day, the second day was very strong as yeast work but today on the third day there is no activity no bubbles, Did I do something wrong?BEST ANSWER: If you have a hydrometer or refractometer you can take a gravity test to know for sure if it is done. Without one of those two tools you do not know. Bucket lids are not always an airtight seal so this causes the airlock not to bubble. If you crack the bucket open and look inside you should see either krausen (foam) or krausen ring around the bucket just above the beer level. These are both signs that fermentation is or has happened.Anyone tried Irish whiskey instead of bourbon? I'm thinking of buying this kit and trying Jameson or Tullamore Dew.BEST ANSWER: I've spoken with several customers who have used Jameson instead of Bourbon and thought it was amazing. I am not a huge whiskey fan, so when I've made this kit, I used a neutral spirit like vodka and my family and friends were raving over it. Just remember that you can add as much or as little bourbon you want. It can be tuned specifically to your palate. Cheers!Will the omega british ale viii be a good yeast option? I have some being used on a stout, was going to wash it and when ready make a starter and pitch into this...BEST ANSWER: I honestly don’t know as I have not used any Omega yeasts yet. The first time I made this kit (Oct 2012) I used Wyeast 1728 Scottish ale yeast, which made a very standard porter. When I made it in Nov 2015, I used White labs WLP070 Bourbon Yeast which is no longer available from this site. That gave it a richer profile and complimented the bourbon. I think the key to this porter kit is what type of bourbon you use. Do you want the yeast to stand out or blend in? The description of the omega British ale viii says Ales produced with this strain tend to be fruity.
FYI. The second time I made this the secondary was steeped with coffee beans and coco nibs. The bourbon was added at the end of a week. It was tons more interesting than the first time I made it.
I’ve been home brewing for 10 years.Would you be able to bottle this into growlers, instead of just using 12 oz. bottles?BEST ANSWER: I put it into 32 oz. bottles so I don't know why you couldn't use growlers instead. Having said that, my plans for my current batch of double IPA is that I'm going to experiment with putting some in growlers. I'll know more on how it turns out in about 3 - 4 weeks. Cheers....I'm in the process of finishing the first fermentation. I was reading the instructions getting ready to siphoning the beer from one bucket to the other. I read online that transferring to another bucket isn't necessary and poses a risk for contamination. My question is, can I leave the beer in the same fermenter for another 2-3 weeks before adding the oak chips or is it necessary to siphon the beer from the primary fermentation bucket to the other?BEST ANSWER: I feel that 2nd fermentation should be transferred to a glass carboy or big mouth bubbler. It adds a lot to the clarity of the beer. There is a risk but you just need to sanitize everything really well and try not to shake things up and add additional oxygen to it. I have a small Co2 cartridge and always give it a little squirt to eliminate any oxygen in the head space of the carboy just before putting the air lock on it. but there is still enough off gassing going on in the 2nd stage you will be just fine. Do it in glass if you can if not go with the bucket. But it helps and is worth it. Enjoy, that was a good beer. Make sure you get a bourbon you enjoy the flavor of as you will be tasting its flavor in the beer!Does this kit come with everything I need ? I'm buying this as a gift for my boyfriend. It will be his first time doing an at home brew. Do I need anything else with this kit ? TIABEST ANSWER: The kit has all the ingredients as long as you also include the yeast. Since he's just starting, I would get the dry yeast option as that's a bit easier to work with. If he is going to bottle the beer, he will also need the priming sugar, although table sugar works fine.
Since you mention this is his first time doing a home brew, the other issue is equipment. If you click on the instructions under additional information it will detail the equipment you need. Basically, you will need a few more things than common kitchen equipment. The Essential Brewing Starer Kit (below) has pretty much everything to get started other than a kettle/pot to boil the liquid and empty bottles to put the finished beer in. If he already has an aluminum or stainless steel pot, like a stock pot, that will hold at least 3 to 4 gallons that's fine (the bigger the better).
You need about 48 12 oz bottles (the kind that require a bottle opener, not the kind that you twist off). You can buy those too but I'm philosophically opposed to buying empty beer bottles when you can buy full ones and empty them yourself.I've made this before and loved it. I agree with the majority of y'all the longer it ages the better it is. My question is this has anyone tried a coffee addition to this? If so how much coffee did you use and was it during the book or secondary fermentation? I figured combining the three greatest beverages beer, coffee, and bourbon you can't really go wrongBEST ANSWER: I haven't tried this, but I have sure thought about it! A buddy of mine recently did a coffee stout, and did it a little different than I had ever heard or seen: He just brewed 1 full pot of REALLY strong dark coffee (Star Bucks something - said it was their darkest version). He took the whole pot, boiled his priming sugar in it, added that to the bottling bucket, and that was it. Super simple, and turned out GREAT! Either way, can you post to NB what you try, and how it turns out? Good luck!Do I have to transfer the beer from one car boy to another for the secondary fermentation? I've been reading some forums and some have said it's not necessary and is a risk for contamination that is not needed.BEST ANSWER: It is not absolutely necessary. However with the proper sanitized equipment it would be beneficial to transfer to secondary to avoid any unwanted off flavors from the beer sitting on the yeast cake for several weeks. I found it also helpful to take a propane torch to the Oak cubes to give it a little extra smoky flavor. It turned out a fabulous.Just put mine to keg after a flawless brew/fermentation -- times/temps/numbers all rang in where they should be. Prepped a yeast starter and had a strong fermentation through out the primary, subtle activity in the secondary. I used Bulliet Bourbon for the soak/addition. Surprised my ABV is only right around 5%.... would have anticipated higher. Is this within an expected range?BEST ANSWER: I ended up at 6.4% after adding a pint & a half of Wild Turkey 101 with the chips and a couple vanilla beans. It came out of the secondary at 5.9% before the bourbon. You could have had some temperature issues during fermentation. I was able to keep mine between 66-68 throughout.Your starter could?ve been too young or small. I now use a 1600ml starter at 48+ hours. For this brew I only used a vail of Wyeast 2565 Kolsch yeast, not a starter. 5% is not too far off. I will be brewing this again and will add a pound of Golden Light DME and a pound of corn sugar to up the ABV. I have better luck with dry yeast in a starter of 4 1/2 pints water, 8 ounces of Golden Light DME and 1/4 tsp Wyeast yeast nutrient. After a 20 minute boil I end up with 1600ml. This should give substantially more ABV. Also, instead of using the chips I will age mine in a used bourbon barrel for the secondary.What is the sanitation process when prepping/adding the wood cubes and bourbon?BEST ANSWER: If you soak the cubes in the bourbon
the alcohol of the bourbon will sanitize the wood.what would be a good choice of liquid yeast for this?BEST ANSWER: I've always used 2 or 3 packs of the Danstar dry yeast not rehydrated and had great results. Finished 3rd in state fair. I use 3 cups of old Barton bourbon and soak the cubes in it for 2 weeks. Sorry I'm no help with Liquid Yeast.How can I tell a beers alcohol content when ordering from your website? ThanksBEST ANSWER: I don't think you can. Alcohol content is determined by the difference in original and final gravities. You will find a calculator here: www.brewersfriend.com/abv-calculator. My OG was 1.07, FG was 1.02, which gives an abv of 6.6%. However, adding the 16 oz of 90 proof bourbon increases the abv to 7.5%.
I was initially disappointed in this brew, but it matured wonderfully. I think it needs to be in the bottle at least 4 months before it really is outstanding.
I will be brewing it again soon for the coming winter. And I will not use Maker's again - that was likely a waste of excellent sour mash!How how do I leave the bottles aging at room temperature before I put them in a fridge to age? Also, is it bad to let it age in the second fermenter for 2-3 weeks and then add the bourbon chips for another 3 weeks and then bottle after that?BEST ANSWER: I followed the instruction sheet and conditioned at room temp for 2 weeks before chilling a few bottles and tasting. Most of my bottles are still at room temp; I chill only when I'm ready for some cool ones. I don't have a spare refrig, or would put them all in.
Steps 18 and 19 on the recipe call for 2-3 weeks in secondary; once there it can stay as long as you want. Mine was in secondary on 11/25, and I did not add the bourbon soaked chips until 1/2. Then bottled two weeks later on 1/16.
One problem I have with this brew, and with several others, is under-carbonation. There is a video on NB about using their priming sugar calculator (https://www.northernbrewer.com/priming-sugar-calculator), which I was unaware of at the time. I will certainly do that on my next brew.Will this yield 5 gallonsBEST ANSWER: I think I recall getting just short of that. I filled about 45 beer bottles.What's everyone getting for Attenuation? I finished really high (before adding bourbon).
That's only about 54%... Making 4.7% abv
I pitched some rehydrated dry yeast yesterday and have no activity. Does this really finish this high?BEST ANSWER: Greeting!
If you are still having trouble with your fermentation you can give us a call anytime!Has anyone tried cherry purée in this kit? Someone said they were going to eliminate the oak chips and use cherries. I have 4lb of black cherry frozen purée and can't decide whether to do this bourbon porter or a chocolate cherry stout. Any help would be appreciatedBEST ANSWER: A bourbon cherry sounds awesome! I used Irish Whiskey in place of bourbon, and added chocolate and coffee so far. Each is better than the last. Good luck!I came up with an OG of 1.090! I brewed this kit before and did get around 1.072. After reading the 1.090 I rinsed the measuring flask and took a new sample with the same result. I go through extra steps to get every possible ounce of fermantables (I rinse the grain bag with boiling water over the wort, I use hot water to get all extract from containers, etc.. ) Is 1.090 possible without any extra additions? My wort temp was 70 F at sample.BEST ANSWER: Extract style kits are so dialed in that it is pretty much impossible to be more than 5 or 10 points off if the volume is right. Especially if you boil half the batch volume then top up with cold water, that can lead to stratification and an inaccurate sample, and that can easily happen over and over again until the suagrs dissolve completely and evenly. I would assume the target OG if at the right volume.I'm a novice Mead maker and would like to attempt a braggot with this kit. I have a fermentation bucket, carboy and airlocks. Is there any additional equipment I will need for this?BEST ANSWER: I would think you are good to go. I have made the White House Honey Porter Kit many times. From my limited knowledge of what you are asking, basically I think you are going to be adding Honey to this kit. In that case yes your equipment should work. Note that this kit will need your fermentation stuff to be 5-6 gallons. Good luck!I have both the dry ale yeast and the liquid Scottish ale yeast. Any downside is using both?BEST ANSWER: Pitching two strains into the same often yields unpredictable results. Sometimes one yeast will dominate the fermentation, other there will be flavor characteristics of both, and other times they can combine to create a third kind of thing. As far as fermentation goes, the wort will turn into beer, but it would be an experiment as far as flavor is concerned.I'm in the last stage, 10 days with the bourbon and chips, and the beer is still fermenting, about one bubble per 30 secs. Should I let it go and wait till fermentation stops before bottling?BEST ANSWER: Hi Ed,
That is probably just residual co2 coming out of solution. Typically there is very little or no actual fermentation that occurs in secondary. If you want to be sure, take a gravity reading. When the SG holds steady for 3 days, you can bottle safely.
You may also be interested in: