ANVIL Foundry™ 10.5 Gallon All-In-One Electric Brewing System w/ Pump

$577.99
Standard Shipping Rates ApplyDetails
+ -

Product details

The ANVIL Foundry™ is the most versatile all-in-one brewing system available, at 10.5 gallons it is perfect for 5 - 6.5-gallon batches. From the triple element low watt density dual voltage heaters for blazing fast heating speeds to the unique grain basket, you won't find a more powerful feature-rich product.

Included Recirculation Pump Kit:

The Recirculation Pump Kit for the Anvil Foundry Brewing System comes with everything you need to start recirculating! Recirculating during the mash can help increase efficiency, extracting more sugars from the grain. This kit includes a perforated disk that wort is run through, helping to clarify it. It also comes with a flow clamp and tubing to hook the system up to the Foundry. Get the most out of your Foundry system with the recirculation pump kit!

ANVIL Foundry™ Key Features:

  • Recirculating Pump Kit included
  • Switchable Between 120V 1600W, 13A and 240V 2800W, 12A for Faster Heating & Better Boils.
  • New 240V/120V Adapter Cable - With this adapter you navigate to 240V for a faster brew day, or brew at the standard electric 120V by simply flipping the switch located on the back of the unit.The only all-in-one on that’s 240/120v
  • New Water Deflecting Screen - The improved screen mount feature has an added gasket with internal water deflecting geometry on the inside to ensure water doesn’t reach the screen.
  • Grain Basket Hosts 1.5” of Side Wall Perforations - They aren’t just back, they are improved! The grain basket’s side wall perforations drastically reduce the amount of stuck mashes from happening.
  • Large Capacity Increases Efficiency and Grain Capacity.
  • Double Wall Insulation Maintains Mash Temps and Increases Heating Speeds.
  • Ultra-Low Watt Density, Triple Element Heaters - Won't Scorch.
  • Linear Digital Power Control and Solid-State Switching for Fine-Tuning your Boil.
  • Turbo 500 Distillation Ready- refer to the manual for more info.
  • Includes High Capacity Stainless Immersion Chiller with Hoses & Fittings.
  • External Pump Won't Plug and is Easy to Clean. No Need to Disassemble Entire Unit! Use for Other Pumping Needs too.

Additional information

Support Documents Click here for documents
Support Documents - Instructions Click here for instructions
SKU

42952

Due to Extended Supplier delays on certain products. Please allow 2-6 weeks for delivery, as this product ships directly from the manufacturer. BLICHMANN ENGINEERING & ANVIL BREWING ARE EXPERIENCING EXTENDED SUPPLIER DELAYS ON CERTAIN PRODUCTS. Express shipping options are not available.

Dimensions:

  • Tank Diameter = 12.5 inches
  • Distance Across the Handles = 17 inches
  • Height of Base Unit = 29.75 inches
  • Lid = 3.25 inches
  • Total Height = 33 inches
  • Spigot Height from Base = 7 inches
  • Shipping Weight = 38 lbs

Wattage:

  • 120V = 1600 watts
  • 240V = 2800 watts

Recirculation Pump Kit Key Features:

  • Anvil Recirculation Pump
  • 4 ft. of 1/2 in. ID Silicone Hose
  • 4 Hose Clamps
  • Flow Clamp
  • Stainless Return Tube
  • Perforated Disc
  • Eye Bolt & Nuts for Eye Bolt

Customer Reviews

Based on 67 reviews
84%
(56)
12%
(8)
4%
(3)
0%
(0)
0%
(0)
A
Anthony S.
Love it. Brewed the first batch last week.

This is an awesome system for the money. I’ve already brewed one batch of IPA and planning the next batch in about a week.

T
Tom M.
Anvil Foundry 10.5 works great!

I brewed over 30 batches of beer using extracts and specialty grains years ago. I had many friends who reported mixed success in all-grain brewing and when I decided to start brewing again, I wanted to go all-grain. After spending months researching equipment and costs, the Anvil Foundry 10.5 looked like the best for cost and flexibility and with the 120/220 power option I am starting with normal house current and can install a 220 circuit if I need to heat up faster. The first batch, Captains Ration Export Stout, was great and the keg is almost gone. I brewed my Octoberfest yesterday and to be honest, the time to bring 6-6.5 gallons from mash temperature to boil is not bad, I have plenty to do with cleaning and other preparations(and lunch). Small space requirements and easy transfer to fermenter. The recirc kit is a must. This grain-brewing system is great - I love it!

J
Jordan B.
Fantastic all in one

I've used this for a few brews so far, and not only is it intuitive to use, but it takes up very little space which is why I opted for this over a three vessel method.

B
Brian H.
Amazing

This system is great! I brew at a local brewery and this is very close to the type of systems we use. Northern Brewer delivered it very quickly and kept me in the loop!

T
Ted F.
Anvil Foundry 10.5 gallon

This makes the whole all grain process easy. Well worth the extra cost.

You recently viewed

Clear recently viewed
ANVIL Foundry™ 10.5 Gallon All-In-One Electric Brewing System w/ Pump

ANVIL Foundry™ 10.5 Gallon All-In-One Electric Brewing System w/ Pump

Customer Reviews

Based on 67 reviews
84%
(56)
12%
(8)
4%
(3)
0%
(0)
0%
(0)
A
Anthony S.
Love it. Brewed the first batch last week.

This is an awesome system for the money. I’ve already brewed one batch of IPA and planning the next batch in about a week.

T
Tom M.
Anvil Foundry 10.5 works great!

I brewed over 30 batches of beer using extracts and specialty grains years ago. I had many friends who reported mixed success in all-grain brewing and when I decided to start brewing again, I wanted to go all-grain. After spending months researching equipment and costs, the Anvil Foundry 10.5 looked like the best for cost and flexibility and with the 120/220 power option I am starting with normal house current and can install a 220 circuit if I need to heat up faster. The first batch, Captains Ration Export Stout, was great and the keg is almost gone. I brewed my Octoberfest yesterday and to be honest, the time to bring 6-6.5 gallons from mash temperature to boil is not bad, I have plenty to do with cleaning and other preparations(and lunch). Small space requirements and easy transfer to fermenter. The recirc kit is a must. This grain-brewing system is great - I love it!

J
Jordan B.
Fantastic all in one

I've used this for a few brews so far, and not only is it intuitive to use, but it takes up very little space which is why I opted for this over a three vessel method.

B
Brian H.
Amazing

This system is great! I brew at a local brewery and this is very close to the type of systems we use. Northern Brewer delivered it very quickly and kept me in the loop!

T
Ted F.
Anvil Foundry 10.5 gallon

This makes the whole all grain process easy. Well worth the extra cost.