Reconditioned Pin Lock Keg Cornelius (Corny)

$79.99
Standard Shipping Rates ApplyDetails
+ -

Product details

Pin lock kegs are perfect for kegging your homebrew, cider, or soda, these reconditioned pin lock 5-gallon kegs are used, but have been tested and approved to hold pressure -- their most important task. Though the exteriors may have cosmetic damage, we guarantee that they are pressure-capable and we personally pressure test each and every one when it comes through our doors.

Needed, but not included, is a CO2 cylinder, Regulator, and Pin Lock Gas (KX07) and Beverage (KX09) lines.

Looking for a more comprehensive system? See our Draft Brewer® keg systems. 

Along with pressure testing each keg, we replace the lid o-rings and outer-post o-rings, if needed. Many of our competitors do not do this, but we want to make absolutely sure you are satisfied -- even if it a used keg at a low price! Our technicians have also cleaned each keg with a caustic soda rinse -- but even so -- the keg may retain a sweet smell similar to a lemon-lime soft drink. The keg exteriors have not had extensive cleaning, so as with most "used" soda kegs we recommend that you thoroughly clean the keg inside (again) and out before using.

A note about o-rings: If you are concerned about the condition of the o-rings you may purchase extra o-rings separately, in case any tear during use.

This amazing price is worth a few dents! Because these kegs are used, many show exterior wear and tear that will not affect the keg performance to hold pressure. Holding pressure is the keg main function, and it will keep your beer tasting fresh and delicious. The affordability of buying "reconditioned" is definitely worth a few scratches and dents.

These kegs are sourced from a variety of vendors and are not customer returns. They may not look new, but they work like new, thus the major discounted price from that of a brand new keg.

22" Tall x 8.75" diameter.

Note: Keg Lube can help prevent CO2 leaks and prolong the life of the keg seals.

A Pin Lock Socket Tool (K197) can help in the removal of Pin Lock posts for cleaning.

Additional information

Support Documents Click here for documents
SKU

K029

Customer Reviews

Based on 11 reviews
73%
(8)
0%
(0)
18%
(2)
0%
(0)
9%
(1)
D
David M.
Pin lock

I put it under pressure and it works fine, great

S
Steve
Pinlock kegs

Bought 4 of these, so far so good, they're not pretty and need a thorough clean inside and out but I prefer pinlock to ball lock for my keezer setup I built two months ago. Life is great with kegs and no more bottles. If you are on the fence Go for it! You won't regret it....unbiased review except of my bias against bottling!! NEVER AGAIN

J
Jason T.
Why bother?

The Keg was very clean on the inside and not too dented up. However, the black rubberized ends were filthy and would never fully come clean. Also the rim around the opening was bent and did not hold pressure until it was jacked up to 60lbs. I was able to straighten in and get it to seal. I mistakenly bought this keg thinking it was a "ball lock". My bad, can't complain there, but after trying to figure out the best/cheapest way to switch it to ball lock nothing really made sense. Pin Lock, is a dinosaur here on the west coast. I found a home for it but it will forever by my bastard keg. Northern has been consistently top notch, this one fell a little short of that standard but that's okay, even superstars miss a layup now and then.

s
shawn c.
Pin lock corny keg.

Item was in good shape and working order. Works great for homebrewing.

J
Jason T.
Bruised but sturdy

The keg is clean, functional, and all the parts are clean and sturdy.

You recently viewed

Clear recently viewed
Reconditioned Pin Lock Keg Cornelius (Corny)

Reconditioned Pin Lock Keg Cornelius (Corny)

Customer Reviews

Based on 11 reviews
73%
(8)
0%
(0)
18%
(2)
0%
(0)
9%
(1)
D
David M.
Pin lock

I put it under pressure and it works fine, great

S
Steve
Pinlock kegs

Bought 4 of these, so far so good, they're not pretty and need a thorough clean inside and out but I prefer pinlock to ball lock for my keezer setup I built two months ago. Life is great with kegs and no more bottles. If you are on the fence Go for it! You won't regret it....unbiased review except of my bias against bottling!! NEVER AGAIN

J
Jason T.
Why bother?

The Keg was very clean on the inside and not too dented up. However, the black rubberized ends were filthy and would never fully come clean. Also the rim around the opening was bent and did not hold pressure until it was jacked up to 60lbs. I was able to straighten in and get it to seal. I mistakenly bought this keg thinking it was a "ball lock". My bad, can't complain there, but after trying to figure out the best/cheapest way to switch it to ball lock nothing really made sense. Pin Lock, is a dinosaur here on the west coast. I found a home for it but it will forever by my bastard keg. Northern has been consistently top notch, this one fell a little short of that standard but that's okay, even superstars miss a layup now and then.

s
shawn c.
Pin lock corny keg.

Item was in good shape and working order. Works great for homebrewing.

J
Jason T.
Bruised but sturdy

The keg is clean, functional, and all the parts are clean and sturdy.