Anti-Gravity Transfer Pump
The Anti-Gravity Transfer Pump is the ultimate tool for moving any and all liquids. Eliminate the back-breaking work of lifting heavy kegs, carboys, and coolers, simply by hooking up this new self-priming pump and flipping a switch. Chill out and drink a beer while your homebrew transfers smoothly from one vessel to another - the diaphragm pump does all the work.
Transfer from primary to secondary, conical to keg, carboy to barrel… the possibilities are endless!
We recommend using with 5/16” tubing.
Note: This does not include tubing or racking cane, check out the Anti-Gravity Transfer Pump Kit for a complete transfer kit solution.
- Barbed threaded inlet/outlet connections with integrated locking tubing collars
- Max Flow: 1 Gallon Per Minute (GPM)
- Suction Ability: 5 Feet
- Max Lift: 150 Feet
- Food Safe Head
- Temp Rating: up to 140 degrees F (Intended for cold-side transfers only)
- 8 ft. Power Cord
- In-line On/Off Switch
- Voltage: 12v (Adapter included)
- Current range: 1.6A-3.0A
- Weight: 2lbs
- Integrated vibration dampening mounting feet
|Support Documents||Click here for documents|
i was happy that i got this, i use it for both transferring and cleaning my draft lines. its a little pricey for my liking though, but it does the job. make sure you use 5/16 ID lines before you get this. wished NB would have include lines with this product.
Great product. Nice not having to worry about losing the siphon or the difficulties starting one. Should have done this a long time ago.
I have had the pump for a few months now and have used it about a half dozen times. It does a great job of being self priming and pulling the liquid up through the tubing.
About the 4th time I was using my pump I dropped it into my bucket of sanitizer! Thankfully it was not plugged in at the time, but I still had a water logged pump. I was able to take apart a few of the housing pieces and let it dry out. Thankfully it still worked. It has worked a few times since then and doesn't show any signs of trouble.
The only difficulty I had was trying to get the right size tubing. I have all kinds of 3/16" and 1/4" beverage tubing from my kegging setup, unfortunately that tubing will not work with the pump, the ID is fine, but the tubing itself is too think and the OD is too big to fit through the connection nuts to the pump. Unfortunately using the proper 1/4" transfer tubing makes for tricky connections to the barb swivels I was planning on using to connect to my ball lock QD's. Turns out I had mostly 3/16" barbs which are too small and are hard to secure properly to a 1/4" tubing. Just be sure to get the proper size tubing and fittings and it will all be great.
Blew my mind how good this little pump is! I't is a race horse and so easy to use!
I can empty a five gallon bucket in about four minutes no Joke! Completely happy with their tech support also They responded quickly to my e-mail. Very happy with purchase.
All in all, I think this pump works great. I've used it a few times since purchasing and have no real complaints. As others have mentioned, it's a little loud, but it's a pump! My only real gripe or suggestion for a future design update would be to include some quick connect hardware for the inlet/outlet tubing just to aid in drying. I really don't want to pull the tubes off after every use and risk damaging the plastic nuts that secure them from overuse or stretch out the tubing ends by regular removal. I'd say that this is a great tool to simplify any transfer processes when brewing solo and don't have an extra set of hands around to help! I've used it for kegging beer and for transferring wine must between fermenters.