3/8" ID Thermoplastic Tubing - Hi Temp Tubing

$6.49
Eligible for Free Shipping.Details
+ -

Product details

Thick-walled food-grade tubing rated for use up to 275° F. 

This food-grade tubing is ideal for hot liquid transfers, especially out of a boil kettle or mash tun. It is rated for use up to 275° F. This thick-wall tubing (1/8" wall) is nice and rigid, and won't kink or collapse under moderate suction, making it a great tubing for use with pumps.

Select between a 3, 6, 10, or 20 foot section.

Additional information

SKU

PC7137L3 - 3 ft
PC7137L6 - 6 ft
PC7137L10 - 10 ft
PC7137L20 - 20 ft

Customer Reviews

Based on 17 reviews
94%
(16)
6%
(1)
0%
(0)
0%
(0)
0%
(0)
T
Troy
Just what I needed

For cooling wort

M
Manny H.
new tubing

I use the tubing to cool the wort. It runs from the hot liquor tank (filled with cold water) to the wort chiller in the boiling kettle. The old tubing got a hole in it so I had to replace it. The new tubing had the same id but the od was thicker which should prevent it from getting a hole

M
Mark T.
Review

1 x 3/8" ID Thermoplastic Tubing - Hi Temp Tubing works as described

C
Customer
flexible and strong

Never had this sort of tubing for, but it's great for a mash tun the high heat doesn't seem to faze it one bit, and it easily comes on and off of the false bottom or valve to clean if need be.

T
TimNMN
Just what I needed and better than I thought

I got this to assist with my building out of an 10-gallon all grain system. Really, I thought I only needed about 6-inches to connect the false bottom to the mash tun drain. I was surprised that I got apparently a bit more than 3 feet of it, nice, I was also able to use it for the drain from my lauter tun into the mash tun. It's stiffer than I thought it might be, but very workable. Brewed my first batch with it and, it's just fine.

You recently viewed

Clear recently viewed
3/8

3/8" ID Thermoplastic Tubing - Hi Temp Tubing

Customer Reviews

Based on 17 reviews
94%
(16)
6%
(1)
0%
(0)
0%
(0)
0%
(0)
T
Troy
Just what I needed

For cooling wort

M
Manny H.
new tubing

I use the tubing to cool the wort. It runs from the hot liquor tank (filled with cold water) to the wort chiller in the boiling kettle. The old tubing got a hole in it so I had to replace it. The new tubing had the same id but the od was thicker which should prevent it from getting a hole

M
Mark T.
Review

1 x 3/8" ID Thermoplastic Tubing - Hi Temp Tubing works as described

C
Customer
flexible and strong

Never had this sort of tubing for, but it's great for a mash tun the high heat doesn't seem to faze it one bit, and it easily comes on and off of the false bottom or valve to clean if need be.

T
TimNMN
Just what I needed and better than I thought

I got this to assist with my building out of an 10-gallon all grain system. Really, I thought I only needed about 6-inches to connect the false bottom to the mash tun drain. I was surprised that I got apparently a bit more than 3 feet of it, nice, I was also able to use it for the drain from my lauter tun into the mash tun. It's stiffer than I thought it might be, but very workable. Brewed my first batch with it and, it's just fine.