Copperhead® Immersion Wort Chiller
The copper brother to our customer favorite Silver Serpent®, the sleek Copperhead® 25-foot copper immersion wort chiller is the fast way to cool your wort to pitching temps! Drop-angle connections prevent the tubing from kinking and potential leaks from dripping into your kettle. Make your brew day easier and faster, allowing you to effortlessly brew better beer. Comes fully assembled with tubing, barbed fittings, and hose clamps.
Quickly cool your wort down to yeast pitching temperature and reduce the chance of contamination. All copper coil construction is easy to clean and will conduct heat better than other metals.
No need to sanitize. Simply drop your clean chiller into the kettle a few minutes before the end of the boil and it will be ready to go.
Brew with peace of mind like never before. Drop-angle connections provide insurance against contamination. Surprise leaks stay outside your kettle and away from cooling wort.
Ensure secure tubing with proprietary barbed fittings. Eradicate shooting streams of water that make a mess in your brew cave. Do away with ill-fitting hose clamps on mis-shapen chiller connections.
Maximize flow and minimize fuss. The Copperhead®; drop-angle eliminates kinked tubing. No more hassling with propping up water hose. Tubing can now hang tension-free, kink-free and problem-free.
Standard garden hose connection allows for brewing outside or connects to a laundry sink faucet as your chilling water source. Use the optional Faucet Adapter to connect your Copperhead® to a standard kitchen faucet when brewing inside. Dimensions: 9 inches wide, 16 inches tall to the bend, 3/8 ID tubing, 25of copper tubing
Proposition 65 Warning for California Consumers: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
Works great! Takes the time to chill wort from hours to minutes!
The chiller works great, and is better than my home-built version. The angled extended ends are great to keep the chiller hanging on the side of the brew pot, and keeps the connections away from the wort.
This immersion chiller worked like a charm! It's a bit small for my keg turned kettle setup, but it chilled 5 gallons of beer with no issues. I wouldn't recommend for a big setup like mine, but it's a great product.
Works as intended. Chills wort quickly. Perfect for 5 gallon batches
Great product! First used it to cool down the Mosaic IPA I made a couple of weeks ago. Worked great. Was cooled to around 100° in less than 15 minutes. Much better than filling a sink full of ice and water. Only issue I had was that I couldn't get a tight connection to the faucet. May need a different adapter. I used a spare plastic one I had. Maybe a brass one will work better. I'll update the next time I brew.