5

You are shopping Northern Brewer US shopping site, to view our Canadian shopping site - Click Here

Copperhead® Immersion Wort Chiller

$77.99

SKU# 41799

Standard Shipping Rates Apply to this product
The copper brother to our customer favorite Silver Serpent®, the sleek Copperhead® 25-foot copper immersion wort chiller is the fast way to cool your wort to pitching temps! Drop-angle connections prevent tubing from kinking and potential leaks from dripping into your kettle. Make your brew day easier and faster, allowing you to effortlessly brew better beer. Comes fully assembled with tubing, barbed fittings and hose clamps.
Total:
$77.99

Availability: In stock

Copperhead™ Copper Coil Immersion Wort Chiller

More Views

  • Copperhead™ Copper Coil Immersion Wort Chiller
Product Details
Quickly cool your wort down to yeast pitching temperature and reduce the chance of contamination. All copper coil construction is easy to clean and will conduct heat better than other metals.

No need to sanitize. Simply drop your clean chiller into the kettle a few minutes before the end of the boil and it will be ready to go.

Brew with peace of mind like never before. Drop-angle connections provide insurance against contamination. Surprise leaks stay outside your kettle and away from cooling wort.

Ensure secure tubing with proprietary barbed fittings. Eradicate shooting streams of water that make a mess in your brew cave. Do away with ill-fitting hose clamps on mis-shapen chiller connections.

Maximize flow and minimize fuss. The Copperhead®; drop-angle eliminates kinked tubing. No more hassling with propping up water hose. Tubing can now hang tension-free, kink-free and problem-free.

Standard garden hose connection allows for brewing outside or connects to a laundry sink faucet as your chilling water source. Use the optional Faucet Adapter to connect your Copperhead® to a standard kitchen faucet when brewing inside. Dimensions: 9 inches wide, 16 inches tall to the bend, 3/8 ID tubing, 25' of copper tubing
Additional Information
Support Documents:No
Reviews
4.7 / 5.0
47 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
39
5
2
1
0
The wort chiller works as advertised. In conjunction with the adapter for a kitchen faucet it saves a lot of time and having to buy ice to cool down wort. I've used it three or four times already and it has worked very well.
November 2, 2017
Purchased
1 month ago
Chills fast!
Cooled 5 gallons of wort in about 15 minutes. Much faster than an ice bath. Very easy to use. Well made and simple. Worth every penny.
October 24, 2017
Purchased
1 month ago
Great Chiller!
This is a great wort chiller. Very high quality. The fitting are nice and prevents leaking water into the wort. I highly recommend this product!
User submitted image
6.13 Gallon Boil
October 5, 2017
Purchased
2 months ago
Immeersion Wort Chiller - Don't try at home without one!
I had an experienced brewer recommend this purchase. I cannot imagine brewing without one. If you are trying to find a way to skimp - do not skimp on this item!
July 24, 2017
Purchased
5 months ago
I now understand why others cost more
The thing only really performs well when I'm cooling wort outside during the Winter. In winter, I can go from 5g of boiling wort to 65F in about 35 minutes. I have 60F well water. In the Summer, it takes about 50 miserable minutes to get down to 65F.

The tubing is fully submerged and doesn't cover much of the interior of my 10g kettle (only doing 5g batches). I need to frequently take off the lid and swirl the wort in order to circulate the hot top and cooler bottom liquid. Annoying and asking for trouble.

I have now eaten the loss and bought a 50' chiller with 1/2" tubing that buyers claim has reduced their identically experienced 45-50 min cool-downs to 15 mins.

Unless you're doing small batches in cold climates, you will be replacing this chiller. So save yourself the trouble and buy a better tool the first time.
July 20, 2017
Wort Chiller is a great addition to my homebrewing equipment
I'm new to homebrewing - I've brewed 6 batches in 6 months. One of the most time consuming parts of brew day is waiting for the wort to cool to pitch your yeast. This cooler cut that time way down, I connect the supply line to my outside hose connection and in 25 minutes I go from boil to 78 degrees f vs: 1.5 hours in the sink ice bath. Saves a ton of time and helps eliminate chance of contamination. I'm very happy that I added this to my equipment.

HIT 'EM WITH THE HEIN
June 27, 2017
Purchased
6 months ago
Maximize your investment and start day 1 with this!
Cools wort quickly, under 15 minutes for a 5 gallon batch, and you can water your garden in the process!

Easy to use and clean. Very pleased with this purchase.
June 13, 2017
Great Chiller
The Copper Head is a great chiller. Very easy to use.
May 2, 2017
Purchased
7 months ago
Easy and reliable
Easy to use and the fittings were all amazing. Chilled my wort in less than half an hour. Afterwards it cleaned up quick.
April 25, 2017
Purchased
8 months ago
Fast cooling
Cools wort quickly and hooks right to kitchen sink with optional adapter. Ample hose length and easy to clean. A word of caution when using an adapter for kitchen faucet. It's threads are sharp, so use a glove or towel to tighten and remove.
April 25, 2017
Purchased
8 months ago
Q&A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 12 questions Browse 12 questions and 23 answers
Is this 50' or 25'?
K E on Oct 25, 2015
BEST ANSWER: I took a quick measurement and it was right around 25'.
Would it be overkill to use this when making a small-batch with a 2 gallon kettle?
O P on Aug 11, 2016
BEST ANSWER: It will certainly chill it quickly! Since the objective is to chill as fast as possible I think it would be fine. It would definitely be faster than an ice bath.
I'm very new to brewing and just setting up. What are the advantages of cooper vs stainless steel wort chillers? Which one should I buy?
Michael F on May 19, 2016
BEST ANSWER: There's no right or wrong answer. Copper is technically more efficient but will tarnish over time which needs to be cleaned off with some brew cleanser. Stainless is more rigid and will not rust or tarnish.
Unpacking instructions? Should the zip ties be taken off?
C H on Apr 15, 2016
BEST ANSWER: Zip ties can be removed. The clear plastic tubes should be able to move freely, but should remain connected to the copper coil.
Would the bend on this chiller clear the top of a 15 gallon mega pot and still be close to the bottom of the pot?
Andrew G on Mar 15, 2016
BEST ANSWER: no I have a ten gallon pot and it does not reach the bottom
What is the ID size of the vinyl tubing?
James J on Feb 3, 2016
BEST ANSWER: .4 inches
What diameter is the metal tubing used in these style chillers?
C D on Jan 14, 2016
BEST ANSWER: The tubing is 3/8" diameter.
Cheers,

Gabe from NB
I boil in a converted 1/2 barrel Sanke keg. How tall is this chiller?
Ray J on Jan 13, 2016
BEST ANSWER: It is 9 inches wide, the coils are 5.5 inches tall and the top f the goose neck is 21 inches tall. I actually spread out the coils when in use to better cool the wort. I highly recommend this cooler.
Does this come with the Faucet Adapter should you want to hook up the wort chiller to the kitchen sink? The description was not clear on whether that was included or was a separate optional product that needed to be bought.
C L on Dec 24, 2015
BEST ANSWER: It does not include the faucet adapter. It is ready to go to attach to a hose or msot utility sink faucets. To use on a kitchen sink, our faucet adapter works on almost all sinks, and that is a separate product. Cheers! James J.
I have a Mark II keg & carboy washer. My thought is to drop the pump in a large bucket of ice cold water and pump it through the Wort chiller and back into the bucket. Will the fitting on the hose attach to the threaded pump?
Eugene H on Dec 1, 2015
BEST ANSWER: The immersion chillers come with garden hose fittings which are not compatible with the included threaded parts on the mark washer. That garden hose fittings comes right off or you might be able to find some adapter at hardware stores potentially. I hope this helps! Cheers! James J.
Will the be large enough for a keggle? My old one was 50 feet and it just cracked.
A shopper on Apr 12, 2017
BEST ANSWER: Depends on the size of your kettle, but more importantly the size batch you are brewing. It will work on 5 gallon batches, but will struggle with anything bigger.
I recently purchased this but it does not fit the threads on my sink. I can bring the screw on piece from my sink to the store to compare sizes, but What size adapter will I need to buy to screw into the chiller?
M I on Jun 4, 2016
BEST ANSWER: Hello Mike,

Thank you for choosing Northern Brewer! You should be able to use the following adapter to hook up to your sink. http://www.northernbrewer.com/faucet-adapter That being said, you can bring in your piece from your sink to the store, and someone there can help you out!

You may also be interested in:

Please wait...

Your selected product has been added to your Cart.
Continue shopping
View cart & checkout