5

You are shopping Northern Brewer US shopping site, to view our Canadian shopping site - Click Here

Draft Brewer® Twin Keg System

$299.99

SKU# K504

Standard Shipping Rates Apply to this product

Introducing Draft Brewer®, the first complete taproom in a box. Quick setup, minimal maintenance, and more time than ever to enjoy your home brew beer.

The Draft Brewer® Twin System is ready out-of-the-box to get your taproom up and running. Start serving and sharing two brews within just days of receiving your new system. Compact yet easily expandable, the Draft Brewer® Twin System is the perfect place to start any kegerator, fridge, or keezer build.

Don’t just share your homebrew, share a lineup of it! Keep variety on tap with the dual-keg Draft Brewer® Twin System.

Includes everything except a CO2 tank to share and enjoy draft homebrew.

Features:

Total:
$299.99

Availability: In stock

Draft Brewer™ Twin System

More Views

  • Draft Brewer® Twin System w/ CO2PO Single Body Regulator
  • Draft Brewer® Twin System w/ CO2PO Single Body Regulator
  • Draft Brewer® CO2 Manifold
  • Draft Brewer® CO2 Manifold
  • Tap Line included with Draft Brewer® Twin System

Videos

Product Details

Finally, a serving method as impressive as your homebrew. Bring homemade beer to a party and you’re interesting. Bring two kegs of homemade beer to a party and you’re a hero!

Compact yet easily expandable, the Draft Brewer® Twin System is the perfect place to start any kegerator, fridge, or keezer build. Serve your brew from any nook or cranny in your home with swivel-connection tap lines. With a Draft Brewer® system, no brew cave or home pub is too small to enjoy good beer on tap.

Enjoy your brew sooner and carbonate two kegs with a CO2 tank (not included) in 1-2 days instead of the standard 2-4 weeks in bottles.

With the Twin System you can serve from two kegs at once for added variety on tap. Disconnect and swap in an already-carbed keg at any time! Fully-assembled Draft Brewer® tap lines snap right on your keg. Plus, if you’re not serving, you can carbonate two kegs at once.

Take the guesswork out of perfect carbonation. Adjust the pressure in real-time and guarantee perfect pours. The ultra-durable CO2PO® Dual-Gauge CO2 Regulator makes carbonation easier than ever. Hand-adjustable pressure knobs are twist-and-go. High-contrast gauges give you pressure information in a quick glance. Enjoy ideal carbonation without nightmares of bottle bombs ever again. Plus, the CO2 manifold distributes pressure from just one CO2 tank (not included) to both kegs.

Best of all, it takes just a swish of sanitizer to prep your Draft Brewer® kegs for the next batch. No more cleaning and capping dozens of bottles. The included Ball-Lock kegs are easy to disassemble for cleaning and have replaceable seals. 

When you're ready, expand your system with additional kegs and a larger gas distributor. Build a keezer using a chest freezer and the ThermoStar Dual-Mode Digital Temperature Controller

Note: Keg Lube can help prevent CO2 leaks and prolong the life of the keg seals. 

Includes everything except a CO2 tank to share and enjoy draft homebrew.

Features:

Additional Information
Reviews
3.5 / 5.0
12 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
5
1
2
3
1
CO2PO regulator issues
Currently pressure testing the kegs, so far, kegs holding up well. Had to fiddle with the gasket to get it to seat properly, but it holds pressure. Purchased brand new CO2 tank to use. Ball lock quick connects not as sturdy as I would like, but they finally seated as well. But that regulator....
At first, was stable for ~20min. Let it alone. Came back 2 hrs later, needle bouncing +/- 3 psi. Performed the regulator purge that was recommended in comments section for the regulator here on NB. Bouncing went away. Left keg, CO2 tank and regulator out to pressure test overnight (set point 10PSI). Came back in the morning, pressure reads 4 psi. Re-adjust needle to 10PSI, come back 20min later, reads 15PSI. This is ALOT of hassle for a part that should be QC-ed before leaving factory, I am pretty disappointing in this. Now my fear is that all the other issues reported about this regulator will come to pass. Reason for 1 star? The regulator is probably the most important part of this purchase - it will affect the quality of the stored beer and the efficacy of the setup to properly carbonate. Without a good regulator, your beer is in jeopardy. I strongly, strongly encourage NB and the CO2PO manufacturers to give this issue an honest look at find a solution that doesn't leave the customer troubleshooting what should be a brand new product.
April 17, 2018
Purchased
2 weeks ago
Great deal on a complete keg system
This system has a lot of items for a great price. I was mainly looking for some new kegs but this had everything included to use them as well. I had one issue though. The included manifold has 2 valves with back flow shutoffs and both of them were seized up I had to disassemble the manifold to get them to allow CO2 to flow through.
February 6, 2018
Purchased
3 months ago
Save a little more for the flex set up
I bought this a year ago. Great quality, in the long run I should of went with the flex system. Works great to be enjoying two brews at the same time, but the problem is drinking one brew while trying to charge another. In theory it can be done, but not really. You or I anyhow run into brew backing up into the air line and have psi fluctuations in the keg I'm charging. The Flex system has two regulators that do not let this happen.
December 27, 2017
Purchased
over 2 years ago
I opted to pay for a shipping upgrade, which was worth it. The delivery was as promised without the, "I can wait" wait and see when the shipment is processed and released. Everything was shipped with care and arrived unscathed.
November 9, 2017
Purchased
6 months ago
Great system!
Better than bottling ... we love draft beer so this was the right option for us
Two beers r better than one....
Everything we have kegged has turned out well! CHEERS
September 19, 2017
Purchased
8 months ago
Great kegging system - uncomfortable handles
I like the kegging system... I don't like the handles on the kegs. I prefer the rubber handles... much more comfortable for lifting the kegs into the keezer.
July 8, 2017
Purchased
over 2 years ago
Quality Questionable
After 2 years of use the regulator started leaking inside the tank pressure gauge. Pressure would jump sometimes 10 psi more to causing over -carbed beer. One keg creaks when you lift it by the handle indicating a weld is broken. The plastic tips on the lid latches wear out fast and due to the one-handle design, forces the lid closure to a specific orientation. Ball lock quick disconnects for gas side are all hard to get on and off. I really appreciate older korney soda kegs now after starting with these.
June 27, 2017
sweet and simple
just got my keg system together and filled with my two favorite brews- great instructions, easy to install into your own fridge. I only bottled once-what a pain in the caboose.....dude this set-up is the cats ass
March 20, 2017
Purchased
1 year ago
Poor Quality
The CO2 regulator was leaking severely in many different locations. The o rings within the gas in poppits for both kegs were destroyed.
July 12, 2016
Response from Northern Brewer
That is irregular, sorry to hear about an issue. Customer service will get you fixed up. Cheers!
November 29, 2016
Northern Brewer
Love new kegs
i love new kegs, i have been using old ones for years and the freedom of only having 1 handle is great for getting hoses on/off!!
January 14, 2016
Q&A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 4 answers
What are the height and width dimensions?? Trying to use a refrigerator for these
A shopper on Jan 15, 2017
BEST ANSWER: The kegs are about 26" tall and 9 inches wide. Cheers!
How do I use the Last Straw with this system?
A shopper on Mar 15, 2017
Draft Brewer® Twin Keg System
Draft Brewer® Twin Keg System
The Last Straw® Bottle Filler
The Last Straw® Bottle Filler
What's the difference between this one and the flex kit?
A shopper on Dec 27, 2017
BEST ANSWER: So the flex system regulator that has 2 separate pressure valves that works both kegs separately. The other kit that looks the same has one pressure valve that goes into a block that splits it for two kegs at the same pressure. The later is the one I bought. I wish now I bought the Flex system. The Flex will allow you to be serving a brew while at the same time carbanating the other, which can't be done with the other set up without issues. Hope that helps.

You may also be interested in:

Please wait...

Your selected product has been added to your Cart.
Continue shopping
View cart & checkout