5

You are shopping Northern Brewer US shopping site, to view our Canadian shopping site - Click Here

Mash/Boil Screen - 12"

$19.99

SKU# 7547

Flat Rate Shipping only $7.99 only from Northern Brewer

Stainless mesh tube replaces a false bottom in a mash tun or boil kettle for lautering wort or filtering whole hops. Overall length is 12.5 inches; 1/2" male pipe threads.


Please note: This product requires the 1/2" Adapter for IsoFlow™ and EZ Clean™ Bulkheads in order to be compatible with IsoFlow™ or EZ Clean™ hardware.
Total:
$19.99

Availability: In stock

Pic of 7547

More Views

  • Heavy Duty Mash / Boil Screen - 12"
Product Details

Stainless mesh tube replaces a false bottom in a mash tun or boil kettle for lautering wort or filtering whole hops. Overall length is 12.5 inches; 1/2" male pipe threads.

Please note: This product requires the 1/2" Adapter for IsoFlow™ and EZ Clean™ Bulkheads in order to be compatible with IsoFlow™ or EZ Clean™ hardware.
Additional Information
Support Documents:No
Reviews
3.8 / 5.0
39 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
14
11
6
7
1
Works Perfectly
The mash screen works perfectly. I have it set up in a 10 gal igloo cooler thats converted into a mash tun and it filters out all the grain debris. I've never had a stuck mash using and i used about 20% oats in my last grain bill.
October 4, 2017
Purchased
4 months ago
Pellet hops may clog this after the boil.
More effective for whole hops after the boil as pellet hops will block your flow especially if you're gravity transferring.
January 3, 2017
Purchased
over 2 years ago
Good for whole hops
I use it as a boil screen. It is ok if you use whole hops but the mesh is not fine enough for most break material and pellet hops. It certainly helps but is not nearly as effective as the finer screen that I use on my other boil kettle.
June 8, 2016
Very nice
I have only done one batch with the screen but it worked perfectly. I would definitely recommend this product.
May 28, 2016
Screen thingy
ok, here's the deal... it's sturdy, cheaper, does the job and fits in the bottom of a 7.5 gallon rubbermaid cooler pretty snuggly. BTW, in case anyone is wondering if there's a cheaper alternative to the false bottoms and this screen..... well there is, its called.. are you ready for this... a stainless steel mandarin strainer. look it up and then buy one.. It works perfectly. Homebrewing solutions 101 baby. Knowledge is power
March 14, 2016
Does the job
The screen does the job of straining the wort from the boil kettle. I have a 20 gallon with the screen installed. However when draining the wort through to the plate chiller, the screen ends up getting caked up in gunk restricting the flow to the chiller. Need to end up constantly scraping the tube with a spoon to clear it off. I did try to swirl the wort but all of the sediment ends up right where the tube is located. Product quality is very good. My suggestion would be to make a unit with a tee fitting and a smaller tube on each side at an angle to hug the side of the pot' so when you swirl, the sediment stays in the center.
May 11, 2014
Great for the price
Works really well. Use it in a 10 gallon mash tun and fits almost perfectly, just needs a slight bend. For the money it's a great buy!
January 29, 2014
Works great in a cooler mash tub
Doesn't filter everything, but does a good job as an alternative to a false bottom.
December 23, 2013
Good for mash tun or kettle using whole hops.
Other reviews have it nailed. Works great in a mash tun. I much prefer it over my old false bottom. I also got one for my kettle and it worked great with whole hops, but was almost completly clogged with pellet hops. To maintain any kind of flow rate I had to constantly stir and a lot of hop material made it into the fermenter in doing so. The clamp does not attach it very securly to the nipple.
December 11, 2013
work well
It works well. Its sits inside the brew kettle.
November 10, 2013
Q&A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 4 answers
Will this product fit the MegaPot 2.0 brew kettle with ball valve?
D K on Feb 5, 2016
BEST ANSWER: I'm sorry to say that it will not fit a MegaPot, since they use Isoflow and EZ clean bulkheads.
Will this prevent a good whirlpool from forming after the boil? or would the 6" be better?
D A on Aug 4, 2016
BEST ANSWER: I have not found it to interfere with a whirlpool but it does depend on your set up.
would it screw into a Bayou Classic kettle
T O on Oct 19, 2015
BEST ANSWER: Chris

Thanks for your question. This screen has 1/2" male pipe threads. As far as I know it should fit on the Bayou kettles.

You may also be interested in:

Please wait...

Your selected product has been added to your Cart.
Continue shopping
View cart & checkout