Brewer’s Edge Mash And Boil Electric Brewing System w/o Pump

$249.99
& Free Shipping Details
+ -

Product details

The Brewer’s Edge® Mash & Boil makes All Grain Brewing easy and affordable. No need for an outdoor burner, complicated brewing stand, or a 220 volt special circuit - it plugs into any 110 volt GFI household outlet. The Mash and Boil’s exclusive double wall stainless construction conserves heat to achieve a rolling boil with only 110 volts and 1600 watts, and its precise thermostat and internal sparging basket lets you mash and boil in the same vessel.

The adjustable digital thermostat can display reading in either Fahrenheit or Celsius and features an adjustable run timer, preset at 3.5 hours for safety.

Not only does the Mash & Boil make brewing simple, but it also helps save you time as well. The delayed start timer lets you set your Mash & Boil to turn on and begin heating your sparge water up to 24 hours after setting the timer. No more watching water boil, simply come home to water ready to brew with!

Note: This system does not include a pump. Check out Brewer’s Edge Mash And Boil Electric Brewing System w/Pump for a complete all in one electric system.

Additional information

SKU

43240

Features:

  • Double Wall Stainless Steel Construction
  • Digital Thermostat
  • Internal Sparging Basket
  • External 1/2" Stainless Steel Valve
  • Mash up to 16 lbs. of malt
  • 7.5-gallon maximum capacity
  • 110 V / 1600 W
  • 5' power cable

Dimensions: 14" W x 28" H (40" H with Sparging Basket)

Customer Reviews

Based on 3 reviews
67%
(2)
0%
(0)
33%
(1)
0%
(0)
0%
(0)
S
S.H.
Brewer’s Edge Mash And Boil Electric Brewing System

I have run 2 beers through this system. I like the timer function so the strike water is ready when I am. Takes up to an hour to reach 165. I'm happy to have the model without the recirc pump as I just drain some of the mash water into a sauce pan a few times and pour it over the mash. I do this every 20 minutes during the mash. Once sparging begins, it takes about 50 minutes to reach a boil. The boil isn't roaring per se, but it's certainly a sufficient boil. The bottom spigot is located well such that when transferring to the fermenter it leaves the layer of trub on the bottom. You have to use care cleaning at the end as to not splash water on the electronics but overall pretty easy to do. I haven't noticed much if any scorching on the bottom or inability to get crud out of corners. We will see how it holds up over time but I think for the price, it is a very competitive all-in-one system.

D
D.T.
Does it’s job.

Metal is cheap. I had to drill more holes in the lid because water boiling creates more pressure than the one hole can handle. Pain to clean due to a lot of nooks and crannies.

L
L.J.
My son loves it

Bought this as a gift for my son and he is thrilled with it. He is also making and sharing some very delicious mead ales with it! (I'm a smart shopper!)

You recently viewed

Clear recently viewed
Brewer’s Edge Mash And Boil Electric Brewing System w/o Pump

Brewer’s Edge Mash And Boil Electric Brewing System w/o Pump

Customer Reviews

Based on 3 reviews
67%
(2)
0%
(0)
33%
(1)
0%
(0)
0%
(0)
S
S.H.
Brewer’s Edge Mash And Boil Electric Brewing System

I have run 2 beers through this system. I like the timer function so the strike water is ready when I am. Takes up to an hour to reach 165. I'm happy to have the model without the recirc pump as I just drain some of the mash water into a sauce pan a few times and pour it over the mash. I do this every 20 minutes during the mash. Once sparging begins, it takes about 50 minutes to reach a boil. The boil isn't roaring per se, but it's certainly a sufficient boil. The bottom spigot is located well such that when transferring to the fermenter it leaves the layer of trub on the bottom. You have to use care cleaning at the end as to not splash water on the electronics but overall pretty easy to do. I haven't noticed much if any scorching on the bottom or inability to get crud out of corners. We will see how it holds up over time but I think for the price, it is a very competitive all-in-one system.

D
D.T.
Does it’s job.

Metal is cheap. I had to drill more holes in the lid because water boiling creates more pressure than the one hole can handle. Pain to clean due to a lot of nooks and crannies.

L
L.J.
My son loves it

Bought this as a gift for my son and he is thrilled with it. He is also making and sharing some very delicious mead ales with it! (I'm a smart shopper!)