Edelmetall™ Brü Burner

SKU: U41161

Engineered to Brew Better

This sexy, super-charged, copper-clad masterpiece pumps out 72,000 BTUs of finely-tuned firepower that goes from zero to full boil in no time flat. Fully-loaded with a precise needle valve that banishes boilovers and allows for crucial adjustments, the Edelmetall™ Brü Burner custom-crafted stays adjust to any kettle size. As sturdy as it is stunning, this is the last burner you’ll ever need—or want—to buy.

Edelmetall™ Leg Extensions raise the burner height to 27" for brewing at a convenient, ergonomic height.

Availability: In stock

From: $139.99

To: $179.98

total: $0.00

Edelmetall™ Brü Burner

  • Edelmetall™ Brü Burner
  • Edelmetall™ Brü Burner-Adjustable stays fit most kettles sizes
  • Edelmetall™ Brü Burner Precision control needle valve for fine-tuning heat output
  • Edelmetall™ Brü Burner Stainless steel vent plate
  • Edelmetall™ Brü Burner Leg Extensions
Edelmetall™ Brü Burner   +$139.99

* Required Fields

total: $0.00


Great beer starts with premium ingredients. And great brewers start with Edelmetall™. Because Edelmetall™ uses raw materials that surpass even the highest German quality standards—from brushed stainless steel to genuine copper finishes. And every tool is custom-designed for a specific brew-day task, incorporating details only a die-hard brewer can appreciate. Designed to complement the stunning exterior of the Edelmetall Bru Burner, the leg extensions raise your kettle to 27” while providing the structural rigidity required to support even the heaviest kettles and biggest batches. Equipped with a reinforcing triangle at its base, these copper-clad steel extensions offer unmatched stability even on rough terrain. Take your Edelmetall to new heights and never lift a full brew pot again.

Additional Information

Support Documents: Edelmetall Brü Burner Product Manual

Customer Reviews

Gorgeous and Mightily Powerful Review by Paul
I can't say enough about this burner - it's quiet, its took 70 degree water to 175 in 10 minutes, and 100 degree water to boiling, and a ROARING boil, in less than 15.

75 to 175 = 10 minutes
100 to 212 < 15

The finish does not stay pristine, but it can be buffed up after the fact if you're desperate.

The thing that impressed me most was how silent this beast is. No roaring or whining, a gentle hiss at best.

Also, given the price, the craftsmanship is outstanding and the capability is wonderful. Don't spend the extra money because it has a brand name you recognize.

I think I'm moderately in love with this thing. Sign of being an adult: excitement over trivial purchases. (Posted on 9/13/14)
Good looking and Sturdy Review by John
Although the stainless steel finish had a few scratches on it, it is a great looking burner. Cut my brewing time down by a half an hour. Uses less gas than my turkey-style burner. I also purchased the Leg Kit. It is very stable. My only complaint is the oxygen control plate on the venturi is very tight against the gas valve. Could be just a quality control issue. Otherwise a great burner. (Posted on 8/30/14)
Great Burner, Fast Boil Review by William
I bought this to replace the old "turkey fryer" darkstar-style burner, and I'm really happy I did. It feels like I'll be using this thing for years. The pictures don't do this thing justice,. it's huge. It's solid and well built.

Big enough to fit my Keggle on easily, and it sit's up high enough for me to siphon out it after cooling.

Great product, I've had several 10 gallon brews now with it and it's noticeably faster and uses less propane than my old burner. The needle valve, and air vent allow you to dial in a good heating level,. this thing gets hot quick,. keep a spray bottle on-hand to help prevent boil overs. (Posted on 8/19/14)
Great Burner Review by Sam
Just picked this up at the scratch and dent from NB. I went in intending to buy a Dark Star because of it's price, but this was sitting - used - on the showroom floor.

This thing is a beast. It is incredibly sturdy, has great flame protections and has pinpoint control to prevent boil overs.

The highlight of this workhorse, definitely the rock solid build. The burner has great recovery after hop additions or dropping in the wort chiller, crank a little and the boil comes right back.

65 Degree to 100 Degrees, 8-10 minutes
170 Degrees to Rolling Boil, 10 minutes

After adding extract - 2 minutes to return to rolling boil

The pinpoint control in unbelievably welcome to be able to control boil over at the hot break and hop additions.

The only downside, it gets hot enough to scorch the pretty copper ring and discolor it pretty badly. I got it used so I went in eyes wide-open. If you get this thinking it will be a display piece with that beautiful copper color, you will be disappointed. That being said, I think the flame licked copper looks cool and it works very very well.

5 stars for function
4 stars for finish
(Posted on 8/13/14)

You may also be interested in the following product(s)

MegaPot 1.2™ Brew Kettle

MegaPot 1.2™ Brew Kettle

From: $119.99

To: $299.99

MegaPot 1.2™ Brew Kettle with Ball Valve / Thermometer

MegaPot 1.2™ Brew Kettle with Ball Valve / Thermometer

From: $219.99

To: $519.98