Edelmetall™ Brü Burner

SKU: 41161

Engineered to Brew Better

This sexy, super-charged, copper-clad masterpiece pumps out 72,000 BTUs of finely-tuned firepower that goes from zero to full boil in no time flat. Fully-loaded with a precise needle valve that banishes boilovers and allows for crucial adjustments, the Edelmetall™ Brü Burner custom-crafted stays adjust to any kettle size. As sturdy as it is stunning, this is the last burner you’ll ever need- or want- to buy.

Availability: In stock


Edelmetall Brü Burner

  • Edelmetall Brü Burner
  • Edelmetall Brü Burner-Adjustable stays fit most kettles sizes
  • Edelmetall Brü Burner-Precision control needle valve for fine-tuning heat output
  • Edelmetall Brü Burner-Stainless steel vent plate


Great beer starts with premium ingredients. And great brewers start with Edelmetall. Because Edelmetall uses raw materials that surpass even the highest German quality standards—from brushed stainless steel to genuine copper finishes. And every tool is custom designed for a specific brew-day task, incorporating details only a die-hard brewer can appreciate.

Additional Information

Support Documents: Edelmetall Brü Burner Product Manual

Customer Reviews

Amazing Review by Ed
This is just an amazing piece of equipment. Looks great, it's quiet and it really speeds up my brew day. One of the best brewing purchases I've ever made, if not the best. WOW. (Posted on 4/18/14)
Fast, quiet, nice! Review by mark at Turbo Brew
This burner looks as good as it performs, don't leave your kettle unless you want a boil over! This is the fastest to boil that I have ever witnessed. Did two 5 gallon batches side by side, and this one blows my old burner away! Sturdy too, but the only thing I would change would be caps on the feet to prevent scratching and protect table surfaces. A nice addition to any home brewers arsenal. (Posted on 4/14/14)
Brilliant Review by Nathan
This burner is on-point and much more than I expected. With a 7.5 gal kettle I cannot wait to use this burner with a half barrel setup. With a stated brewing capacity of 30 gallons, it is easily more, I just need a larger kettle! Heavy, well constructed, adjustable in both size for kettle and burner intensity, and obviously, it is appealing to look at. I'm sort of concerned with the copper tarnishing over time, but who cares, the quality of beer produced with this burner will be great! Built for home brewing with both beer and brewer in mind! Thanks NB, I'm really looking forward to more Edelmetall equipment in the future. (Posted on 4/5/14)
awesome the picture do not do it justice Review by 007
awesome the picture do not do it justice it is a massive burner. I was worried that the fifteen gallon kettle would not be stable. I was wrong if you are tired of 30,000 burner and waiting for the boil buy one of these. I was very impressed solid construction very quiet and no more black soot on my pot. I should have bought it a long time ago. here is to a faster boil and more time enjoying the beer and not waiting on a boil. you will not be disappointed. (Posted on 3/19/14)
Great upgrade Review by Ideal Brewing
After years of brewing on a 'blowtorch' burner I was ready to upgrade. Looked at Blichmann and Edelmetall, decided that the price value pointed to the Bru Burner. I am very happy with the choice.
Beside the bling factor, construction is solid, set up a snap and performance is awesome.
Time to temp is definitely less, but more important this burner is so quiet. I actually found my brew day was more relaxed without the persistent sound of a blow touch in my ears. This is a great upgrade. (Posted on 3/11/14)
Great Bling For Your Buck. Review by Matthew
I don't review many products, but I thought I should at least say something about this burner. It looks great and is very sturdy. The burner itself is well designed and creates an array of perfect blue flames that heats any amount water in a very short timeframe. If you're looking for a burner that gets the job done at a good price, then look no further.
(Posted on 3/11/14)
Excellent Burner Review by tgn
I recently used this burner for the first time, and I prefer it over my old Banjo Cooker. First, I live in Chicago, so brewing outside in winter is a challenge. The Edelmetall has great heat output, and also focuses the energy due to the low placement of the burner within the body. The low placement also protects the flame from getting blown out by the wind; here in Chicago my Banjo Cooker would have to be restarted several times during a 60 minute boil. The Edelmetall is also designed to hold your brew kettle in place. Finally, I feel that I can control the output of the Edelmetall much better than the Banjo. I highly recommend this product. (Posted on 2/23/14)
You need one of these! Review by Burns's Bullets & Brewing
I received this for Christmas and have brewed about 6 batches using this burner. It works extremely well compared to other burners on the market I've used. What I like best about it is that it has a banjo style burner that heats the entire bottom of the pot evenly. The burner set on a "medium" setting will boil three gallons of water from room temperature in about 10 minuets. In addition this thing is built to last; and with a little care taken it will last indefinitely. I highly recommend this burner you will not be disappointed!! (Posted on 2/22/14)
Don't wait you're missing out! Review by AmickBrew
This is one of the best purchases I have made for brewing. It is incredibly well built, better then I expected. I have been using a turkey fryer for a couple years and this blows it away. The one thing I did not expect was how whisper quiet it is, I can barely tell its on. It can also be fine tuned to hold a perfect boil. You will not be sorry if you purchase this burner. (Posted on 1/20/14)
Great burner Review by Sparetime Brewing
Other then a few loose screws this burner is awesome. Great heat, solid built. And very sturdy. Definitely recommend this to anyone. (Posted on 1/12/14)
Light it up! Review by Todd
Many may dismiss this burner due to the bling. That's a mistake. It is incredibly well built, and functions like a pro. Took 12 gallons of mash-out wort from 130F to boiling in about 18min. Wow. And I am shocked at how quiet she runs. Home-run with this piece NB! (Posted on 1/3/14)
Great build and looks pretty too! Review by Robert
It's a solid burner with a little bling to it. It took 7 gallons from room temp to boil in about 25 minutes and I didn't realize that it wasn't on full burn till about half way through the test run.

The only con is it weighs as much as a small car. (Posted on 1/2/14)
Great burner Bling Bling Review by MELVIN
I was dubious at first, thought I should have just gotten the Blichman... This thing is so freakin beautiful... I was concerned that the air vents were small, but they are not. Turned all the way up, the vent adjusted to about half way gives a solid blue flame... No more of that raw unburned propane smell, it burns very clean. On my first 75 min boil, my kettle was absolutely clean on the bottom! No more soot! The needle valve allows precise adjustment of the flame. Im very happy with this burner! (Posted on 12/27/13)
Edelmetall Brü Burner Review by Stephen
The design is very nice and definitely top quality. I took this burner for a test run with 5 gallons of cold water (outside atmosphere temperature was roughly 35 degrees) and on full gas it took approximately 24 minutes(+/- a minute). This burner is amazing and I would definitely recommend it to people. I think the only drawback for some people is that it doesnt have the ability to be raised up with higher legs like the Blichmann burner. I wouldnt want it to be any higher though as Id prefer to NOT have it topple by some unforseen accident. I may have overdone it for my first burner in my first time brewing but Ive seen it before and knew this was what I wanted to work with. Also this WAS an early Christmas present from my folks so even then...this burner is well worth the price. $140 plus $8 shipping? I know it cost much more than that just to ship it so thank you NB! If I had an unlimited amount of money I would buy all kinds of toys from you guys! (Posted on 12/17/13)
Edelmetall Review by Drew
Fantastic product all around. Superior design, excellent craftsmanship, and quality materials used. I was skeptical spending $140 on a burner but the time it has saved on brew day is priceless; saved roughly 45-60 minutes heating double batches. You get what you pay for with this burner. Highly recommended. (Posted on 12/10/13)
Edelmetall vs. Blachmann Floor Burner Review by FryDaddy's Brewing!
I have used several burners and this one I really like because it is easy to adjust not only the air flow but has a knob right where the gas goes it to control it to exactly temp. I contemplated getting this burner vs. the Blichmann floor burner but given all the pros and cons, (cons being that they don't have stands yet) but I would buy this one again not only because of its looks but it is very well built, perhaps even better than the Blichmann! Thank you NB for carrying such great products for us brewers! (Posted on 11/26/13)