Regulator for Disposable Oxygen Cylinder

$29.99

SKU# K342

Flat Rate Shipping only $7.99 only from Northern Brewer
This adjustable regulator works with disposable oxygen cylinders, which can be found at hardware stores. Using pure oxygen is by far the most effective way to oxygenate your wort. Most brewers notice improved yeast health and attenuation after they switch to pure oxygen.
Total:
$29.99

Availability: In stock

K342

More Views

  • Regulator for Disposable Oxygen Cylinder
  • Regulator for Disposable Oxygen Cylinder
Product Details
This adjustable regulator works with disposable oxygen cylinders, which can be found at hardware stores. Using pure oxygen is by far the most effective way to oxygenate your wort. Most brewers notice improved yeast health and attenuation after they switch to pure oxygen. The regulator has a 3/16" barb; it is recommended to use 3/16" beverage tubing (K052) and a #1 worm gear clamp (K124) to connect the tubing. Commonly used with a 0.5 micron carb stone (7867).
Additional Information
Support Documents:No
Reviews
3.8 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
1
Awesome
I Have been using this item for over a year, and with the addition of this, my fermentation started much quicker and was way more robust then using the old methods.
December 13, 2011
Works great
I started using this for my meads and the fermanation is going in just a few hours. Definitely makes a big difference.
November 20, 2013
Did the job
Product did what I needed it to. Since none of my local brew stores have stocked this part since before spring because of product defects I was a little leery of buying it online but it worked great and fit tight on the O2 canister I bought at my hardware store. Fermentation begin within 3 hours and was very vigorous.
October 9, 2015
Didn't work again!
This is my third one. It works for the first few times and then the bladder in the valve blows out. No I'm not turning it all the way open. Actually this reminds me to ask for one more...my last attempt as it is awesome when it does work.
March 3, 2016
Response from Northern Brewer
Hi Matt, sorry to hear about an issue. Was this the replacement one that blew out? That is quite odd, not sure what is causing this to happen. We could send a replacement if the same address works? Rare to see that happen, let alone twice....are you using the standard bernzomatic red tanks? Looking forward to hearing back!
November 21, 2016
Northern Brewer N
Q&A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 4 answers
For the life of me, cannot get the regulator to seat on a benzomatic standard tank from Home Depot. It will seat halfway and then leak gas from the tank. Any ideas? Thanks!
F A on Aug 6, 2016
BEST ANSWER: Turn the regulator to the closed position, then screw it on the tank. If the big pin in the center of the regulator is in the "down" position then push it to the "up" position. It appears when the regulator is just screwed on the tank, no pressure is put on the regulator until it is "opened"
What is the flow rate of this regulator when fully open?
Zachary G on Feb 9, 2016
BEST ANSWER: This is a very simple regulator that does not regulate flow rate to a specific rate - but around 2.5 liters per minute roughly. We have an upgrade that includes a flow rate meter.

Please wait...

Your selected product has been added to your Cart.

Continue shopping
View cart & checkout