5

You are shopping Northern Brewer US shopping site, to view our Canadian shopping site - Click Here

IsoFlow™ Single Piece Bulkhead

$19.99

SKU# 41429

Flat Rate Shipping only $7.99 only from Northern Brewer
Our revolutionary patent-pending IsoFlow™ bulkhead is purpose-built for homebrewing. With snap-in accessories, you can easily pop in a diptube for transferring every last ounce of wort, or a hose barb (not included) to hook up your false bottom. Requires a 7/8" hole for mounting.

Now standard on all new MegaPot 1.2™ brew kettles with ball valves, the IsoFlow™ bulkhead will retrofit to previous drilled versions of the MegaPot 1.2™ or any other kettle with a 7/8" hole.
Total:
$19.99

Availability: In stock

IsoFlow Single Piece Bulkhead w/ diptube

More Views

  • IsoFlow Single Piece Bulkhead w/ diptube
  • IsoFlow Single Piece Bulkhead
Product Details
Our revolutionary patent-pending IsoFlow™ bulkhead is purpose-built for homebrewing. With snap-in accessories, you can easily pop in a diptube for transferring every last ounce of wort, or a hose barb (not included) to hook up your false bottom.

The adjustable diptube swivels to suit whatever pick up angle you want, and draws down to within ⅛” from the bottom of the kettle. The single-piece construction makes for quick assembly and exceptional leak-proofing.

Includes 304 stainless steel bulkhead, and diptube, and silicone o-rings.
Additional Information
Support Documents:Complete Instructions
Reviews
3.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
1
1
0
0
Ok construction.
Ok construction.
January 27, 2016
Works well enough
I like it, but maybe I'm just installing it wrong. Since there's nothing on the inside of the kettle for me to grip with a tool, I had to use a lot of teflon tape to ensure the ball valve would not leak. Other than that, I like it.
May 4, 2016
Q&A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 13 questions Browse 13 questions and 30 answers
Could this set up be used as a whirlpool port?
Josh on Aug 22, 2016
BEST ANSWER: Sure it can. Obviously it would require a method of connecting a pump hose to the threaded end.. in my case I use a 1/2 " male Cam lock fitting and connect the hose with female ends from the pump to the fitting. I installed mine at the top to create the whirlpool at the height of my boil. Hope this helps.
Just received the Iso flow bulkhead with dip tube. The dip tube does not fit into the bulkhead. Did I receive the incorrect sized tube?
P S on Nov 25, 2015
BEST ANSWER: I lubed the perimeter of the tube with keg lube and pushed it in to the bulkhead with the pre fitted o rings in place. one end of the tube inserts easier than the other.
What is the size of the outside connection? Will a 1/2" NPT Female fit?
H E on Oct 19, 2015
BEST ANSWER: That is 1/2" NPT threads on this bulkhead. 1/2" female NPT fittings will fit.
Can you use this as a cooler bulkhead?
A shopper on Jun 5, 2017
BEST ANSWER: Perhaps, if the cooler wall is thin enough. The "lower" nut in this picture is fixed, so it cannot be moved either direction. If there's enough space between the fixed nut and the inside-mounted nut, then it could work as a cooler bulkhead.
Hi Folks,

I just bought this and installed it into my kettle. I noticed that the dip tube "snaps in" via an o-ring gasket situated inside of the bulkhead. This can't last forever. Has anybody tried replacing it or removing it for cleaning? It looks like it might be a surgical job. Furthermore, what is the size of said o-ring?

All the Best,
Bobby
Bobby C on Apr 9, 2017
BEST ANSWER: I am not sure how long that internal O-ring will last, but I have been using mine for a few years now w/o any issues. I am pretty sure that you can use a small automotive pick to dig out the old red O-ring. I am not sure what size that is, but I bet if you contacted NB, they would guide you. Have a great journey
Should the ball valve be flush with the fixed nut?
F A on Apr 30, 2016
BEST ANSWER: It's not necessary for it to be flush, just thread it on as far as it will go.
Is the diptube included with the bulkhead or do you need to order it separately?
N S on Feb 8, 2016
BEST ANSWER: Hello Lou,

Thank you for choosing Northern Brewer! The isoflow single piece bulkhead includes the dip tube. I hope that this helps, have a great day!
What size hole will work for this bulkhead: 13/16", 7/8", or both?
J M on Jan 23, 2016
BEST ANSWER: Hello JM,

Thank you for choosing Northern Brewer! You will need a 7/8" hole for the isoflow bulkhead. A 13/16" hole will be too small. I hope that this helps!
Hi Folks,

I just bought this and installed it into my kettle. I noticed that the dip tube "snaps in" via an o-ring gasket situated inside of the bulkhead. This can't last forever. Has anybody tried replacing it or removing it for cleaning? It looks like it might be a surgical job. Furthermore, what is the size of said o-ring?

All the Best,
Bobby
A shopper on Apr 9, 2017
BEST ANSWER: I have one installed in a kettle since 9/15. I clean it in place . If you have to remove it, use an o ring pick don't know the size cause I have and o ring kit with assorted sizes.
What is the vertical length of the dip-tube from the center of the bulkhead to the bottom of the dip-tube / How high ( above the bottom of the pot ) would I need to center punch for the bulkhead hole to have the dip-tube be 1/8" - 3/16" off the bottom of my pot?
Are the vertical measurements identical for the Isoflow Bulkhead and the EZ Clean Bulkhead ?
John A on Jan 10, 2017
BEST ANSWER: It is the same dip tube in those other assemblies. The 7/8" diameter hole we punch has the bottom of the hole at 1 and 3/16" from the bottom and 2 1/8" at the top of that hole. That puts the dip tube at exactly 1/8" off the bottom. If you can replicate that measurement, we use a jig to hold the kettle to the perfect location then punch the hole. My math works out to the pilot hole that you drill being at exactly 1.66 inches off the bottom but I would double check that! Measure twice, drill once!
How long is the Nipple? And is it a straight through or close?
Gilbert H on Feb 17, 2016
BEST ANSWER: The overall length is 2" with a fixed nut in the middle. The portion that goes through the kettle wall is 15/16" long and the threads are 5/8" NPT. The portion that is outside of the kettle is 13/16" long and the threads are 1/2" NPT for attaching a standard ball valve.
It appears that all the reviews listed for the IsoFlow Single Piece Bulkhead are actually reviews for siphon tubing. Where are the bulkhead reviews?
N S on Feb 11, 2016
BEST ANSWER: Thanks for contacting us Lou. I have forwarded this issue to our web team and they are working on a solution.
How is it beneficial to get within 1/8 of the bottom of the pot? Wouldn't it be fully surrounded by trub this close to the bottom of the pot?
Andrew G on Nov 2, 2015
BEST ANSWER: Andrew

If you do a short 5-10 minute whirlpool at the end of the boil by stirring the wort for a minute or so and letting it rest the trub will form a nice cone in the center of the kettle and you will be able to draw clean wort from around that cone. A bit of trub int he fermentor is normal but you can leave most of it in the kettle and leave minimal liquid behind this way.

Cheers

Todd H

Northern Brewer LLC

You may also be interested in:

Please wait...

Your selected product has been added to your Cart.
Continue shopping
View cart & checkout