Ball Lock Conversion Kit for Sanke Couplers

$29.99
& Free Shipping over $59 Details
+ -

Product details

Now you can easily serve commercial beer out of your homebrew kegerator or keezer, without having to swap out liquid and gas lines.

This kit adds Ball-Lock soda keg posts to any commercial sankey coupler. Easily use your existing Ball-Lock lines and connect that commercial keg in minutes.

Requires a standard Sankey Coupler with threaded gas and liquid ports.

Note: this kit is not compatible with the Low-Profile Sankey Coupler, which has barbed fittings.

Additional information

SKU 42009

Customer Reviews

Based on 13 reviews
69%
(9)
15%
(2)
8%
(1)
0%
(0)
8%
(1)
M
Mike A.
A rip-roaring good time for all

I already had a sanke connection in place already and had to disassemble and reconnect with the ball lock converters. Once I got past that difficulty, actually install the ball lock to sanke connections was pretty easy. I would recommend to any homebrewers out there - though preferably, I'd have gotten a sanke homebrew keg, knowing what I know now. And had about $400 to flush down the toilet.

M
Mike H.

Ball Lock Conversion Kit for Sanke Couplers

D
Dan K.

Great product, works great

t
tom b.
Ball Lock/Sankey conversion kit

Even though the picture does not portray the actual connectors, the kit works as advertised.

J
Joshua R.
well its not what you show in the picture...

Like I said it is not what you show in the picture, which is why we ordered yours which are much more costly than the others out there. The others out there pictured below are nearly undistinguishable from the in and outs, and I could have ordered what I received from others much cheaper. We have ordered these before and they have been very problematic, seem to work only about 50% of the time. The problem is gasket inside gets unseated when tightening them enough so they don't leak or just with the pressure of our kombucha at 12-16 psi, then it blocks flow and they don't work at all. Maybe they work better at low pressure for beer.

You recently viewed

Clear recently viewed
Ball Lock Conversion Kit for Sanke Couplers

Ball Lock Conversion Kit for Sanke Couplers

Customer Reviews

Based on 13 reviews
69%
(9)
15%
(2)
8%
(1)
0%
(0)
8%
(1)
M
Mike A.
A rip-roaring good time for all

I already had a sanke connection in place already and had to disassemble and reconnect with the ball lock converters. Once I got past that difficulty, actually install the ball lock to sanke connections was pretty easy. I would recommend to any homebrewers out there - though preferably, I'd have gotten a sanke homebrew keg, knowing what I know now. And had about $400 to flush down the toilet.

M
Mike H.

Ball Lock Conversion Kit for Sanke Couplers

D
Dan K.

Great product, works great

t
tom b.
Ball Lock/Sankey conversion kit

Even though the picture does not portray the actual connectors, the kit works as advertised.

J
Joshua R.
well its not what you show in the picture...

Like I said it is not what you show in the picture, which is why we ordered yours which are much more costly than the others out there. The others out there pictured below are nearly undistinguishable from the in and outs, and I could have ordered what I received from others much cheaper. We have ordered these before and they have been very problematic, seem to work only about 50% of the time. The problem is gasket inside gets unseated when tightening them enough so they don't leak or just with the pressure of our kombucha at 12-16 psi, then it blocks flow and they don't work at all. Maybe they work better at low pressure for beer.