CO2 Distributor 4-Way w/ 1/4" MFL shutoffs Lead-Free

Sale!
$44.73
$63.99
Standard Shipping Rates ApplyDetails
+ -

Product details

Add more kegs to your kegerator or keezer with a CO2 Distributor. Or have an extra gas line available for your draft bottle filler.

This CO2 manifold comes with four 1/4" MFL shutoff valves and a threaded MFL inlet for flexible installations where the lines can be removed. 1/4" MFL connections work with barbed swivel nuts, so a variety of tubing sizes can be used. Corrosion-resistant nickel-plated brass manifold has shut-off valves with an integral check valve to prevent backflow of gas or liquid.

We highly recommend a flared nylon washer in each swivel-nut connection to prevent leaks.

For a more permanent installation, check out our distributors that have barbed connections.

Looking for a complete system? See our keg systems.

Proposition 65 Warning for California Consumers: ;This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Additional information

SKU K278

Customer Reviews

Based on 23 reviews
78%
(18)
9%
(2)
13%
(3)
0%
(0)
0%
(0)
C
Charles M.
Quality control?

Similar to another reviewer, two of the valves had stuck check balls, and I had to remove the valves and dislodge the check balls and reassemble the manifold. After that, it worked just fine. No knock against Northern Brewer, unless they're the manufacturer.

M
Matt B.
Good product but needed work

Hooked the manifold/distributor to CO2 and wasn’t getting any pressure out when I opened each valve. Ended up removing each valve and found there is a check ball in the valve. When the valves were installed they must use a glue to seal the threads to the manifold and that glue had seeped into each valve and froze the check ball into place, I used a pick to pop them loose. The glue is 1 time use and wouldn’t seal after reinstalling the valves so I used Teflon tape after I cleaned the threads. Simple issue just reviewing for constructive criticism. Otherwise always great products from northern brewer.

B
Brian C.
It distributes CO2 4 ways

It works great. Shutoffs operate smoothly. Seems well-constructed. Does what it is supposed to.

C
Christina W.
Great Product

Very easy to set up and a great space saver for multiple keg hookups.

P
Patrick H.
Super easy to install

Using this distributor for my Keezer. I have three taps, but bought an extra shutoff just incase I want to snug in a 4th keg and move the CO2 bottle outside someday. Everything came as expected.

You recently viewed

Clear recently viewed
CO2 Distributor 4-Way w/ 1/4

CO2 Distributor 4-Way w/ 1/4" MFL shutoffs Lead-Free

Customer Reviews

Based on 23 reviews
78%
(18)
9%
(2)
13%
(3)
0%
(0)
0%
(0)
C
Charles M.
Quality control?

Similar to another reviewer, two of the valves had stuck check balls, and I had to remove the valves and dislodge the check balls and reassemble the manifold. After that, it worked just fine. No knock against Northern Brewer, unless they're the manufacturer.

M
Matt B.
Good product but needed work

Hooked the manifold/distributor to CO2 and wasn’t getting any pressure out when I opened each valve. Ended up removing each valve and found there is a check ball in the valve. When the valves were installed they must use a glue to seal the threads to the manifold and that glue had seeped into each valve and froze the check ball into place, I used a pick to pop them loose. The glue is 1 time use and wouldn’t seal after reinstalling the valves so I used Teflon tape after I cleaned the threads. Simple issue just reviewing for constructive criticism. Otherwise always great products from northern brewer.

B
Brian C.
It distributes CO2 4 ways

It works great. Shutoffs operate smoothly. Seems well-constructed. Does what it is supposed to.

C
Christina W.
Great Product

Very easy to set up and a great space saver for multiple keg hookups.

P
Patrick H.
Super easy to install

Using this distributor for my Keezer. I have three taps, but bought an extra shutoff just incase I want to snug in a 4th keg and move the CO2 bottle outside someday. Everything came as expected.