Female Stainless Quick Disconnect x 1/2" Barb

$16.99
Eligible for Free Shipping.Details
+ -

Product details

This female quick disconnect with 1/2" NPT barbed threading easily accepts the male version (either 40854 or 40857). Just press down on the female disconnect spring-loaded band and slide the male disconnect into place, then release the band to lock it down against the internal gasket.

Quickly and effortlessly switch lines between fittings.

Use with hot or cold liquids up to 60 psi.

Use caution when transferring hot liquids - the stainless disconnect will get hot to the touch.

Additional information

SKU 40855

Customer Reviews

Based on 18 reviews
89%
(16)
6%
(1)
6%
(1)
0%
(0)
0%
(0)
C
Customer
Quick disconnect

Exactly what I expected. A little teflon tape and my counterflow chiller was ready to go.

S
Stephen L.
Works great!

I have several of these and they work great. On one occasion I discovered an O-ring inside wasn’t seated properly and was easy to reseat. Overall I’m very pleased with these.

E
Erik C.
Great Disconnects

These items were used to make lines for a new pump and kettle. Work great with 1/2" ID silicone tubing. Easy to clean. Easy and perfect seal with the male disconnects.

J
Joe M.-.U.B.
Great disconnects! Highly recommended

No issues. Work great with 1/2" ID silicone tubing. Easy to clean. Easy and perfect seal with the male disconnects.

J
John W.
Great luck with these

The issue with this style quick connect in general is that you need to stick with the same source for all the parts to ensure they play well together. They aren't universal.
That being said, I've stuck with these from Northern Brewer and, after several years, they are still working quite well. I can connect/disconnect with one hand and I've had no issues with leaks so far. They do get hot when working with hot wort, but that's going to be true of any metal fitting.

You recently viewed

Clear recently viewed
Female Stainless Quick Disconnect x 1/2

Female Stainless Quick Disconnect x 1/2" Barb

Customer Reviews

Based on 18 reviews
89%
(16)
6%
(1)
6%
(1)
0%
(0)
0%
(0)
C
Customer
Quick disconnect

Exactly what I expected. A little teflon tape and my counterflow chiller was ready to go.

S
Stephen L.
Works great!

I have several of these and they work great. On one occasion I discovered an O-ring inside wasn’t seated properly and was easy to reseat. Overall I’m very pleased with these.

E
Erik C.
Great Disconnects

These items were used to make lines for a new pump and kettle. Work great with 1/2" ID silicone tubing. Easy to clean. Easy and perfect seal with the male disconnects.

J
Joe M.-.U.B.
Great disconnects! Highly recommended

No issues. Work great with 1/2" ID silicone tubing. Easy to clean. Easy and perfect seal with the male disconnects.

J
John W.
Great luck with these

The issue with this style quick connect in general is that you need to stick with the same source for all the parts to ensure they play well together. They aren't universal.
That being said, I've stuck with these from Northern Brewer and, after several years, they are still working quite well. I can connect/disconnect with one hand and I've had no issues with leaks so far. They do get hot when working with hot wort, but that's going to be true of any metal fitting.