The 1/4 inch barbed liquid Pin Lock Disconnect

Pin Lock Disconnect - 1/4" Barb Liquid

$7.99

Eligible for Free Shipping.Details

Product details

Liquid Pin Lock disconnect with a 1/4" barb. Connects to the liquid-out post on any Pin Lock home brew keg.

The barbed connection is ideal for more permanent installations where the disconnect does not need to be removed from the line.

Requires the use of 1/4" ID beverage tubing and Worm Gear or Oetiker clamps to hold it in place.

Note: this larger diameter tubing has less restriction on the flow of the beer and is best used for installations with roughly 15 feet of tubing length from the keg to the tap. We recommend the MFL disconnect (K037), a swivel nut (K123) and 3/16" ID tubing for shorter lengths of draft line.

Additional information

SKU

K014

As advertised.

1/4” pin lock disconnect- barbed

Product probably works well, unfortunately I needed an MFL to connect with my Blichmann Beer gun. It would have been nice if the sales person would have told me this before I purchased

Pin disconnects with barbed ends.

I bought these to continue my experiment with fermenting in kegs instead of carboys. These make it simple to use as a blow off and for adding oxygen. So far its working fine.

Good

It worked like it should, nothing more to say.

Good

Worked like it should, nothing more I can say.

You recently viewed

Clear recently viewed