Stainless Steel Tail Piece 1/4" MFL

$7.39
& Free Shipping over $59 Details
+ -

Product details

A stainless steel tailpiece with 1/4" MFL fitting for quick connection to any diameter beverage tubing that is equipped with a barbed swivel nut. This makes disassembly easy for cleaning or for portable installs. All stainless construction matches well with a stainless steel shank and faucet.

Requires a Hex Nut or Wing Nut for connection to a beer shank, as well as a neoprene washer; sold separately here. Can also be attached to a commercial sankey coupler. Requires tubing that is equipped with a barbed swivel nut.

Additional information

SKU K027

Customer Reviews

Based on 10 reviews
90%
(9)
10%
(1)
0%
(0)
0%
(0)
0%
(0)
M
Mitchell F.
Great for when you use different line lengths

Having an MFL thread on the tailpiece instead of barbs allows you to switch out different length lines for different carbonation levels. Just make sure your shank is very tight and your wingnut holding the tailpiece is extremely tight (borderline over-tightened) or else the tailpiece will turn when you are trying to work on it

W
William R.

Tail Piece 1/4" MFL

C
Christopher E.
Works

Did the job thx

N
Norman-O
I like it!

Easy to disconnect lines. About the same length as the barb. Maybe a bit more but not much.

S
Stephan T.
Sanke D modification

I bought this to convert my Sanke D coupler for keg filling and purging. This was a perfect fit.

You recently viewed

Clear recently viewed
Stainless Steel Tail Piece 1/4

Stainless Steel Tail Piece 1/4" MFL

Customer Reviews

Based on 10 reviews
90%
(9)
10%
(1)
0%
(0)
0%
(0)
0%
(0)
M
Mitchell F.
Great for when you use different line lengths

Having an MFL thread on the tailpiece instead of barbs allows you to switch out different length lines for different carbonation levels. Just make sure your shank is very tight and your wingnut holding the tailpiece is extremely tight (borderline over-tightened) or else the tailpiece will turn when you are trying to work on it

W
William R.

Tail Piece 1/4" MFL

C
Christopher E.
Works

Did the job thx

N
Norman-O
I like it!

Easy to disconnect lines. About the same length as the barb. Maybe a bit more but not much.

S
Stephan T.
Sanke D modification

I bought this to convert my Sanke D coupler for keg filling and purging. This was a perfect fit.