Hullwrecker® 2-roller Grain Mill & Base

$129.99
& Free Shipping Details
+ -

Product details

For perfectly milled grains, ease of use and superior dependability, look no further than the Hullwrecker® grain mill. Our new two roller mill takes the guesswork out of achieving the ideal crush for your brewery. The Hullwrecker® grain mill features a fully adjustable roller gap from 0.025 all the way to 0.1, allowing you to finely tune the crush to your extract preference.

Unlike other available grain mills, the Hullwrecker® comes complete with a custom-designed metal base that fits perfectly on any standard 5 or 6.5-gallon plastic bucket.

Features:

  • Sealed ball bearings
  • Ergonomic crank handle
  • 7 Ib capacity grain hopper
  • Included heavy-duty metal base, fits on standard 5 or 6.5-gallon plastic buckets
  • Use with included crank handle, or electric drill

**Does not grind corn.**

Additional information

Support Documents - Instructions Click here for instructions
SKU

42338

Customer Reviews

Based on 194 reviews
79%
(154)
14%
(28)
6%
(12)
0%
(0)
0%
(0)
C
Chris N.

Hullwrecker® 2-roller Grain Mill & Base

D
Derald B.
Awesome

I like the fact that each side of the roller can be moved separately, I can get a decent crush and modify it anyway I want. Easy to put together too!

B
BJ T.
Hullwrecker 2 roller grain mill

Love it, built solid, good design, bearings not bushings, it was rubbing a little on the sides so I placed 1 nylon Mylar washer .014 thick (little thicker than a hair) at the end of each roller & prior to assembly I sprayed all 4 ends of the rollers & the washers with Liquid Wrench Dry silicone lube part # L512 (drys quickly, no oily residual), this is not food grade spray, the washers I found at Macs Hardware 32 cents each & fit good enough part # 33546-F two pieces & part # 33545-E two pieces,,,, they were in a box labeled lamp washers. Installing the washers fit perfect, only slight finger pressure to line up the screws, it snugged everything up perfectly, no rubbing out the sides, runs so smooth couldn't be happier here. And yes I would recommend the Hullwrecker to others.

p
phil g.
Corn Cracker

You get what you pay for now a days and this is worth the $$$.

T
Thomas B.
It Crushes the Grains!

Easy assembly, no issues with parts or construction at all, which I'd seen in a few negative reviews. Solid construction and the adjustments are super easy. I've been using it with the manual crank adjustment and even that gives a very fine grind. I've been hitting OG with expected efficiency, what more can you ask for?

You recently viewed

Clear recently viewed
Hullwrecker® 2-roller Grain Mill & Base

Hullwrecker® 2-roller Grain Mill & Base

Customer Reviews

Based on 194 reviews
79%
(154)
14%
(28)
6%
(12)
0%
(0)
0%
(0)
C
Chris N.

Hullwrecker® 2-roller Grain Mill & Base

D
Derald B.
Awesome

I like the fact that each side of the roller can be moved separately, I can get a decent crush and modify it anyway I want. Easy to put together too!

B
BJ T.
Hullwrecker 2 roller grain mill

Love it, built solid, good design, bearings not bushings, it was rubbing a little on the sides so I placed 1 nylon Mylar washer .014 thick (little thicker than a hair) at the end of each roller & prior to assembly I sprayed all 4 ends of the rollers & the washers with Liquid Wrench Dry silicone lube part # L512 (drys quickly, no oily residual), this is not food grade spray, the washers I found at Macs Hardware 32 cents each & fit good enough part # 33546-F two pieces & part # 33545-E two pieces,,,, they were in a box labeled lamp washers. Installing the washers fit perfect, only slight finger pressure to line up the screws, it snugged everything up perfectly, no rubbing out the sides, runs so smooth couldn't be happier here. And yes I would recommend the Hullwrecker to others.

p
phil g.
Corn Cracker

You get what you pay for now a days and this is worth the $$$.

T
Thomas B.
It Crushes the Grains!

Easy assembly, no issues with parts or construction at all, which I'd seen in a few negative reviews. Solid construction and the adjustments are super easy. I've been using it with the manual crank adjustment and even that gives a very fine grind. I've been hitting OG with expected efficiency, what more can you ask for?