5

You are shopping Northern Brewer US shopping site, to view our Canadian shopping site - Click Here

BeerGun® Bottle Filler Version 2 with Accessory Kit

$99.99

SKU# K561

Flat Rate Shipping only $7.99 only from Northern Brewer
The BeerGun® is an innovative stainless bottle filler that is less complex than a traditional counter-pressure filler. One-handed operation—just pull the trigger!
Easily fill a growler of your kegged beer for a party or fill perfectly carbonated bottles for competition.

The BeerGun® purges a bottle with CO2 gas from a draft system and then transfers carbonated beer from a keg into the purged bottle with minimal foaming, preserving a high level of the beer's carbonation. It is extremely simple to clean and set up. Everything that touches the beer is stainless steel, and includes 10 feet of 3/16" ID hose and a cleaning brush.

The BeerGun® now includes the Accessory Kit with everything you need to perfectly fill bottles and growlers.
Total:
$99.99

Availability: In stock

More Views

Videos

Product Details
The BeerGun® is an innovative stainless bottle filler that is less complex than a traditional counter-pressure filler. One-handed operation—just pull the trigger! Easily fill a growler of your kegged beer for a party or fill perfectly carbonated bottles for competition.

The BeerGun® purges a bottle with CO2 gas from a draft system and then transfers carbonated beer from a keg into the purged bottle with minimal foaming, preserving a high level of the beer's carbonation. It is extremely simple to clean and set up. Everything that touches the beer is stainless steel, and includes 10 feet of 3/16" ID hose and a cleaning brush.

Also needed but not included is a tee or wye adapter to split the gas line between the keg and the CO2 supply. We recommend a wye adapter (#K035) and a 1/4" MFL shutoff valve (#K038) added to your regulator. Or upgrade your kegerator/keezer with a gas distribution manifold. Always have an extra CO2 port on hand!

Includes:
  • Accessory Kit now included as standard item
  • Warm-touch grip with ambidextrous thumb actuated CO2 valve
  • Positively retained beer seal tip - no more lost tips!
  • Anti-microbial beer hose keeps contamination at bay!
  • Includes a plastic tool case
  • Tool free super fast disassembly
  • Includes Ball Lock Disconnect -1/4" MFL Liquid
Additional Information
Support Documents:BeerGun Version 2.0 Manual
Reviews
3.8 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
1
0
0
1
Newly Upgraded BeerGun is Amazeballs!
I have used the Northern Brewer Last Straw numerous times and always had issues with foaming. I have also used the original Blichmann BeerGun having issues with losing the rubber tip into the bottom of a bottle and having to dump a bottle of beer to retrieve it.

The new Blichmann BeerGun works great. No foaming issues like the Last Straw, and no lost tips like the original BeerGun. Fits perfectly in your hand and the new CO2 trigger makes for a smoother transition between the beer and gas triggers, leading to less accidental CO2 slips into half full bottles creating geysers. The Beer trigger on this model also seems to have less slip on the fingers. On the older model I would find my fingers starting to slip off the trigger 3/4 of the way through a bottle and have to stop and readjust before beginning again. This hasn't been an issue so far on the new model.
January 17, 2018
Purchased
1 month ago
Could be better.
It is hard to set up and so bulky. Never using it again.
December 2, 2017
Purchased
3 months ago
No foaming
No problems with foaming. Just lowered pressure in keg to 10-12 psi. Very easy to use.
October 25, 2017
Purchased
4 months ago
I'm glad I made the switch to a beer gun!
I used the beer gun for the first time today. Although the initial setup takes a few more minutes than a siphon, it makes the job so much easier and the bottle filling consistently carbed and filled. The ability to pre-fill and top the bottles off with CO2 is a great feature!
User submitted image
User submitted image
September 17, 2017
Purchased
5 months ago
Q&A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 12 answers
So this is used primarily to fill your bottle/growler from already an ALREADY carbonated keg? It does not carbonate the beer as it is added to the bottle/growler or it might a little but not to desired levels?
A shopper on Aug 3, 2017
BEST ANSWER: Your beer should already be carbonated to the desired CO2 level. The beer gun does not carbonate as it fills. You will want to be able to separately control the CO2 pressure used to push the beer through the beer gun. This is mainly to prevent foaming and does not contribute to the CO2 level absorbed into the beer.
Can this be used to bottle 750ml champagne style bottles?
A shopper on Jan 18, 2018
BEST ANSWER: I don’t see why not. The barrel is about a foot long. It might not reach all the way to the bottom, but you start filling by tilting the bottle anyway. I’ve used it to fill 22oz bombers before.
What is in the "included"
accessory pack?
A shopper on Dec 19, 2017
BEST ANSWER: The accessory pack contains the hoses and hardware to connect the gun to your CO2 tank and keg.
Which is better, Blichman or The lastStraw?
A shopper on Dec 8, 2017
BEST ANSWER: I have a blichman love it easy to use and clean.
So if I bottle beer with this is the end result like normal bottle conditioned beers? Can I store them for long periods or do they need to be used quicker then traditional conditioned bottles?
A shopper on Sep 12, 2017
BEST ANSWER: I think of it as just another way to bottle beer!!!
Would this work for bottling carbonated soda?
A shopper on Mar 11, 2017
BEST ANSWER: Sure, it can work for that use. It's a bit tougher to get sodas carbonated to the level that people expect soda to be carbonated at, though! "Commercial" soda is carbonated to a very high level, it's a little tricky to do it that way at home, without very-long serving lines, to maintain the resistance needed to hold the CO2 in solution. The "Flow-Control" faucets can also help with this. But the BeerGun-type fillers could be used to fill bottles with soda from a keg of carbonated soda, yes. -Mike W, Northern Brewer

You may also be interested in:

Please wait...

Your selected product has been added to your Cart.
Continue shopping
View cart & checkout