Screen for Funnel
Optional funnel screen for 8", 10", and anti-splash funnels.
got three. Get at least 2 if you pick these up because they clog quickly and you need to swap them out very frequently especially as you get to the last few inches of your wort where all the gunk is. You have to pour the wort in slowly too because once it's clogged , that's it. Swap out as soon as you see it getting clogged. Rinse at the sink and then sanitize while you replace with the another one. It is very much a chore, but you end up keeping a lot of crap out of your fermentor.
These screens may serve a purpose at some point, but it's definitely not when you are trying to transfer to primary after your boil. I've used a fine mesh kitchen strainer for a while to strain out the hops during transfer and wanted to see if these would simplify the job. They clogged in about half a second, because the mesh is so fine. These might be better served as a filter from secondary to bottling bucket after a dry hop. We'll see...
Does not fit or attaches to buckets need a better design. It does stop the extra debris
Pretty much useless. Clogged within seconds of x-fer out of my brew kettle. Save your money.
They fit into the funnel real well. However, we poured Wort VERY slowly and screen clogged after 1/2 gallon of Caribou Slobber. We bought 4 screens, changed out two, but really too much hassle. Maybe using a hop bag into kettle and then when racking to primary, use sterilized cheesecloth to filter. The funnel is very nice however.